| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Clear rubber/latex sheeting? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12930 |
Page 1 of 1 |
| Author: | LanceK [ Mon Jul 23, 2007 2:59 am ] |
| Post subject: | |
Does anyone have a source for clear rubber sheeting I can use for my vacuum press jigs? Thanks |
|
| Author: | Jim Watts [ Mon Jul 23, 2007 3:35 am ] |
| Post subject: | |
Lance, check Mcmaster Carr, catalog page 3421 online. Jim |
|
| Author: | Rick Turner [ Mon Jul 23, 2007 3:41 am ] |
| Post subject: | |
I went with McMaster-Carr and got silicone rubber because I want to eventually use some heat activated polyester sheet glue in my vacuum frame press. The silicone rubber is good up to very high temps. |
|
| Author: | LanceK [ Mon Jul 23, 2007 3:43 am ] |
| Post subject: | |
Perfect! Thanks guys! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|