Clue: He is a member here.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| NTB http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=12932 |
Page 1 of 1 |
| Author: | Bobc [ Mon Jul 23, 2007 6:53 am ] |
| Post subject: | |
Clue: He is a member here.
|
|
| Author: | LanceK [ Mon Jul 23, 2007 7:40 am ] |
| Post subject: | |
John Hall |
|
| Author: | Sam Price [ Mon Jul 23, 2007 7:43 am ] |
| Post subject: | |
Grrr. The headstock reminds of John Kinnaird....bet I'm wrong!! 
|
|
| Author: | Michael Dale Payne [ Mon Jul 23, 2007 8:10 am ] |
| Post subject: | |
I was thinking Steve K. |
|
| Author: | Don Williams [ Mon Jul 23, 2007 8:27 am ] |
| Post subject: | |
That does have a certain Kinnairdishness about it, doesn't it? Nice Brazilian too... |
|
| Author: | Pwoolson [ Mon Jul 23, 2007 8:32 am ] |
| Post subject: | |
Hmmmm. Bob, would I be right is saying that it is built with some nice ZOOT? By someone that really knows ZOOT? |
|
| Author: | Bobc [ Mon Jul 23, 2007 8:33 am ] |
| Post subject: | |
Lance you win the Tub...... |
|
| Author: | Bobc [ Mon Jul 23, 2007 8:35 am ] |
| Post subject: | |
Here's the front view. 
|
|
| Author: | Don Williams [ Mon Jul 23, 2007 10:15 am ] |
| Post subject: | |
Sho' is nice.... 
|
|
| Author: | Matt Gage [ Mon Jul 23, 2007 10:18 am ] |
| Post subject: | |
|
I wish it was one of mine. |
|
| Author: | tippie53 [ Mon Jul 23, 2007 11:19 am ] |
| Post subject: | |
You should hear this. I will have it at the UMGF Naz fest aug 6th. This is built based on pre martin specs. BRW back and sides with a bear claw adi top and bracing . The top is .100 and the back bracing is the vintage brook stick lower back braces. Not a bad one for sure . The headstock inlay is done Ala Dave Nichols. This is the type martin uses. john |
|
| Author: | Terry Stowell [ Mon Jul 23, 2007 11:51 am ] |
| Post subject: | |
Is that "pearlzilla" ? If so, even the side reinforcements are inlaid with pearl. John also inlaid his fireplace mantle. Musta had some extra pearl laying around.... |
|
| Author: | Don Williams [ Mon Jul 23, 2007 12:31 pm ] |
| Post subject: | |
[QUOTE=tippie53] This is built based on pre martin specs. [/QUOTE] Wow! Sure looks like a Martin design though, doesn't it? 
|
|
| Author: | tippie53 [ Mon Jul 23, 2007 1:10 pm ] |
| Post subject: | |
Not pearlzilla This is pearlzilla . This is a D45 custom design based on pre way martin spec with BRW and Adi top and braces with 5/16 X bracing and more pearl than the abalone could want to produce 
|
|
| Author: | Terry Stowell [ Mon Jul 23, 2007 1:27 pm ] |
| Post subject: | |
NOW I remember. I hoped we might get you in here. How bout a closeup? |
|
| Author: | rich altieri [ Mon Jul 23, 2007 1:56 pm ] |
| Post subject: | |
Congrats John on an awesome piece. Not sure where you find the time to do all that you do. You must have 28 hours in your day. |
|
| Author: | tippie53 [ Mon Jul 23, 2007 8:36 pm ] |
| Post subject: | |
I think we do 32 now LOL Call me sometime Rich 570-682-8046 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|