Hi all! Does any body know what to use to remove the l glue left behind after removing a pick gaurd?
I'm trying not to destroy my lac. top. I had a brain fart while installing it(hate it when that happens)
Thanks
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| glue removal http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13168 |
Page 1 of 1 |
| Author: | BOBP [ Sat Aug 11, 2007 6:20 am ] |
| Post subject: | |
Hi all! Does any body know what to use to remove the l glue left behind after removing a pick gaurd? I'm trying not to destroy my lac. top. I had a brain fart while installing it(hate it when that happens) Thanks
|
|
| Author: | Rick Turner [ Sat Aug 11, 2007 6:52 am ] |
| Post subject: | |
You didn't say what kind of guitar, what kind of pickguard, or what kind of glue. How about some helpful info here... If it's a contact adhesive then try xylene (Goof Off). If it's a white glue, then get De Glue Goo. You could also try mineral spirits. None of the above hurt nitro lacquer in short exposures...15 minutes or so. |
|
| Author: | BOBP [ Sat Aug 11, 2007 7:05 am ] |
| Post subject: | |
Sorry for the lack of info LMI self adhesive pick guard Thanks |
|
| Author: | Rick Turner [ Sat Aug 11, 2007 9:02 am ] |
| Post subject: | |
First try mineral spirits, and if that doesn't get it, go for the xylene. Either way, do it in a well ventilated space. Use and old clean T-shirt and wear rubber gloves. |
|
| Author: | BOBP [ Sun Aug 12, 2007 9:49 am ] |
| Post subject: | |
Thanks Rick the goo-gone worked like a champ |
|
| Author: | John Mayes [ Sun Aug 12, 2007 10:36 am ] |
| Post subject: | |
naptha/lighter fluid works well for these applications too... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|