| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| neck resets in Virginia http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13222 |
Page 1 of 1 |
| Author: | Evan Gluck [ Wed Aug 15, 2007 3:24 am ] |
| Post subject: | |
I have a customer whose father has a 1952 0-18 Martin that is in obvious need of a neck reset and other repairs. He would like to have it done locally. He is near Roanoke Va. Any ideas? Best, Evan |
|
| Author: | Bob Long [ Wed Aug 15, 2007 5:10 am ] |
| Post subject: | |
Hey Evan! John Calkin is in Staunton Va. I'm not sure how far that is from Roanoke. I'm sure you can get in touch with him here. Huss and Dalton John works at H&D but does repairs as well. Long |
|
| Author: | crazymanmichael [ Thu Aug 16, 2007 11:47 am ] |
| Post subject: | |
i have an acquaintance in manassas who also needs a martin reset and a new bridge. does anyone have jim warwick's contact info, or know of any other competant repair folks in the area? |
|
| Author: | KenH [ Thu Aug 16, 2007 12:01 pm ] |
| Post subject: | |
Frank Finnoccio is a short drive away in Allentown, PA. I highly reccomend him. |
|
| Author: | crazymanmichael [ Thu Aug 16, 2007 11:55 pm ] |
| Post subject: | |
todd, thanks for the info. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|