Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Center Line Marker (Pics)
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13328		 Page 1 of 1
Author:  Alexandru Marian [ Wed Aug 22, 2007 4:59 am ]
Post subject: 
Cool.  Very useful. I'll try to make one from hardwood and a steel pin. 
Author:  WaddyThomson [ Wed Aug 22, 2007 5:02 am ]
Post subject: 
Yeah, I wonder what shipping would be to Romania for that 89 cent item? 
Author:  Chansen [ Wed Aug 22, 2007 6:21 am ]
Post subject: 
That is an ingenious little tool isn't it! Thanks for the tip.

Waddy/Alex-
Bad news on shipping... FedEx anyway.

To Constanta:


To Bucharest:


Or you could throw it in a 6-10 day envelope via the good ol' USPS for about $11. Probably the more economical choice eh?
Author:  Alexandru Marian [ Wed Aug 22, 2007 6:55 am ]
Post subject: 
For crying out loud.... Thats the price for a nice Shane's Lutz PLUS a decent EIR set.

Last time I received something with Fedex from the US was about 3-4 years ago and it was smth like 45$.  I guess that in the mean while the Atlantic doubled its width

Author:  Martin Turner [ Wed Aug 22, 2007 10:20 am ]
Post subject: 
Im lazy, I stick a mark at halfway and then run a tightly gripped pencil along the brace. As long as I havent had a few glasses of red wine before hand the line is centred enough for my purposes (shaping braces).
Author:  Heath Blair [ Wed Aug 22, 2007 10:29 am ]
Post subject: 
that actually is a cool little tool and the price is right. my question to you hesh, is what are you doing using wobbly brace stock? Big smile
Author:  crazymanmichael [ Wed Aug 22, 2007 1:44 pm ]
Post subject: 
markers using this principal have been around longer than me, but i've not seen a commercial one this size before.
Author:  JohnAbercrombie [ Wed Aug 22, 2007 3:43 pm ]
Post subject: 
Off-topic (a bit)
A similar tool with two points (and a bit larger) is used when '8-siding' square stock for boat spars.
Author:  Billy T [ Wed Aug 22, 2007 7:38 pm ]
Post subject: 
[quote]It's genuine imitation nylon and only weighs a few grams. [/quote]

    I hate to tell you this Hesh! That's not imitation! It's real nylon!!!
Author:  BlackHeart [ Thu Aug 23, 2007 7:11 pm ]
Post subject: 


Wierd, Syncronicity, I just found mine a few days ago, from my r/c glider days. Gentle lady, I went through 2 or 3 of them.


You can make one with a drill press. Drill a pencil hole, put the pencil in (or whatever marking item you use) Then drill a hole that it will go into in another piece of wood, so that it rotates around the pencil or what you use. Then rotate the wood under the drill press bit to drill dowl holes. It will be perfectly centered.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/