Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

6 months of progress... man this is slow!
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13353		 Page 1 of 1
Author:  Chansen [ Thu Aug 23, 2007 2:53 am ]
Post subject: 
OK, here is my progress to date. It's more like 4.5 or 5 months... but this is what I've done in my spare time. I am intentionally keeping any close up shots far away from all of you! 














That's it as of last night! Need to trim the excess off the back and get that top on now!! It's starting to feel a bit more like a guitar and less like an ugly, expensive birdhouse.

Author:  Bill Greene [ Thu Aug 23, 2007 3:02 am ]
Post subject: 
I'm with Todd, looks great to me. I've finished my second and your rosette is already better than what I've tried. The boat looks terrific, and is neat as it can be.

For spare time building, I'd say you're cruising! Great work.
Author:  redennis3 [ Thu Aug 23, 2007 3:16 am ]
Post subject: 

I've been workin on my first for about a year and a few months. I guess its all those jigs you have to build as you do the first one. I should be able to build the second in about 3 weeks


     Yours is lookin great,                       Red         &nb sp;         &nb sp;         &nb sp;     

Author:  Chansen [ Thu Aug 23, 2007 3:26 am ]
Post subject: 

[QUOTE=Hesh1956] When my first had the back on but not the top I called it a litter box........ [/QUOTE]

No cats would be safe in Tacoma if such desecration ever occurred.

I am definitely enjoying the process so far - it's a relaxing project when I'm not staring at it scratching my head on what to do next or what to do to fix whatever anti-progression (my word for "whoops") I just made.




Author:  Sam Price [ Thu Aug 23, 2007 4:19 am ]
Post subject: 
Just take your time and enjoy the progress. It's looking great!!!

I only get a few hours a week to work on my guitar- lots of little hungry mouths to feed, and all the rest. At this stage, if I rushed, my guitars will end up as worse as my first!!!
Author:  WaddyThomson [ Thu Aug 23, 2007 6:08 am ]
Post subject: 
You are screaming along.  I have spent the last month just working on my rosette.
Author:  Michael Lloyd [ Thu Aug 23, 2007 6:33 am ]
Post subject: 
Very nice clean work. What type of neck joint are you planning to use?

Author:  Blain [ Thu Aug 23, 2007 7:08 am ]
Post subject: 
Very nice work Christian.

I think (I'm hoping at least) that the first guitar usually takes a lot longer than the rest. I think once we get the hang of making a guitar, the process will be a lot faster.

Hang in there. It will all be worth it in the end.
Author:  Chansen [ Thu Aug 23, 2007 7:29 am ]
Post subject: 
Michael - I am planning on doing the mortise and tenon / bolt-on neck. I started this project with Cumpiano's book (which I still regularly turn to), but I have taken a lot from Jonathan Kinkade's book as well. 

I have a rough cut laminated neck-blank from RC Tonewoods (haven't started the neck part at all yet) - I heard somewhere that the neck/fingerboard accounts for nearly half the total build time. Does that jive with everyone's experience too? I only ask because I'd like to finish this in the next 6 months if possible without sacrificing quality. What do you guys think?
Author:  nathan c [ Thu Aug 23, 2007 11:04 pm ]
Post subject: 
I'm building my first and next month will be a year for me. I got the back braced, and am currently working on the top. Maybe by this time next year I'll have it french polished
Author:  Dave Stewart [ Fri Aug 24, 2007 12:12 am ]
Post subject: 

Don't be too hard on yourself.


".....first get good,...then get fast..."
Author:  Chansen [ Fri Aug 24, 2007 5:35 am ]
Post subject: 
Thanks Todd for the breakdown. I tend to forget about finishing in terms of total build time.

***This is the second time I posted this because the first time it stopped the post and called me a spammer.

Author:  KenH [ Fri Aug 24, 2007 12:47 pm ]
Post subject: 
Looking good Christian!  I really like the looks of the wood for the back and sides. Nice clean work also!
Author:  BlackHeart [ Sat Aug 25, 2007 6:10 pm ]
Post subject: 
Im about at the same amount of time for mine. About the same place. Half the time was jigging and rejigging, and redoing mistakes though. I dont think the neck would take 6 months to carve. Id say 4 hours for basic rough in, and 4 more for finnish sanding and 4 more for the heck of it. Stewimac will be doing my fretboard slotting the first dozen times I imagine, so thats a few weeks right there. 
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/