Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Newbie: Advice with Wood Selection
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13382		 Page 1 of 1
Author:  Glenn LaSalle [ Sat Aug 25, 2007 2:18 am ]
Post subject: 

HI,


I just regestered, and am in process of planning my first build (although I have been lurking for awhile). I find this site to be extremely helpful in my research, and am impressed with the level of knowledge sharing and generally great attitude.


I have decided to build an OM style guitar, with Mahogany B&S.  However, for a little visual effect, I want to go with a slightly flamed mahogany.  Given that, any suggestions on top, and wood bindings?  I have been playing guitar for 30 years, and play fingerstyle - not a light attack, but I do like to vary the attack.


I am current;ly final;izing my work shop (small and modest, but should work).  Any advice or suggestions would be most appreciated.


Thanks!


Glenn


 
Author:  Chansen [ Sat Aug 25, 2007 3:59 am ]
Post subject: 
I would tend to agree with Chris on the flamed maple bindings.

I am going with a sitka top for my first and I really love it - I initially wanted something a little different like lutz or WRC but was convinced to go with the tried-and-true sitka and I am not disappointed.

You could always go for a mahogany top... I played a hand-built one once and I liked the sound but I wasn't too crazy about how plain looking it was. The builder wanted 3,200 for a guitar with no bindings.

Anyway, welcome to the OLF!!! And remember that with so many choices along the way with building a guitar it is going to come down to personal preference for most of your decisions. Good luck!
Author:  Glenn LaSalle [ Sat Aug 25, 2007 5:11 am ]
Post subject: 

Thanks!  WRT scratch or kit, I am divided here.  My heart says build from scratch, but my head says maybe I should have help on the first one  (i expect this to be a continuing hobby).


So, I think I will take advantage of LMI's shop services, and maybe get the sides bent, and get a slotted fingerboard - but do the rest "scratch", if that makes any sense.


WRT top, i was definately going with spruce - but there are so many choices.  My Franklin guitars have engleman, and I really like the sound - but I don't want to start with engleman.  I was thinking carpathian or sitka (bearclaw).


Glenn
Author:  Don Williams [ Sat Aug 25, 2007 11:44 pm ]
Post subject: 
Glenn, Welcome to the OLF!

Not to be too opportunistic here, but I have some really nice figured African Mahogany that is close to going up on my website, and some flamed Honduran Mahogany that is already up there. I also have some very lightly flamed Honduran Mahogany. If you're not in a rush, I'll give you 10% off any of that stuff as a first-time buyer and Newbie here on the OLF.

This shameless commercial brought to you by New England Tonewoods
Author:  Bill Greene [ Sun Aug 26, 2007 12:09 am ]
Post subject: 
All good advice. I agree with Todd on the "kit" thing. You can take a kit, and make changes on the fly in order to personalize it to your taste. I used wood bindings, carved my own braces, added a different endgraft, ended up bending my sides on a pipe (ruined the supplied pre-bent set), changed the neck profile, went with bone nut/saddle combo, different bridge pins/end pin, etc.

Best of luck!
Author:  Don Williams [ Sun Aug 26, 2007 3:46 am ]
Post subject: 
Yeah, I have to agree with the kit thing being the easiest way to go. If you're just looking to get a taste of the experience, this as a good way to go at it.
Author:  Dave Anderson [ Sun Aug 26, 2007 4:11 am ]
Post subject: 
Hi Glenn and Welcome,
I think mahogany would be a very good choice for your first.
It's a treat to work and looks great too. I would agree with the others to build a kit on your first guitar. I did and was very happy with it. The only trouble I had was fitting the dovetail neck joint. The mortise and tenon (bolt on) would be easier for you. Have fun with it and good luck making a fine first guitar!
Author:  Glenn LaSalle [ Sun Aug 26, 2007 4:20 am ]
Post subject: 

Very generous offer Don!  I really appreciate it. I think I will probably take everybodies advice and work frm one of the "kits" for the first.


Thanks Again!!


Glenn
Author:  Dave Rickard [ Tue Aug 28, 2007 3:49 am ]
Post subject: 
[QUOTE=glasalle]  (i expect this to be a continuing hobby).


Glenn

[/QUOTE]
Yep No one can build just one
Author:  SteveCourtright [ Tue Aug 28, 2007 3:57 am ]
Post subject: 
There is no harm in starting with a "kit," IMHO - many of us here did this as our first. What's nice about that is you get to collect tools and make jigs as you go with a lower investment up front. With a kit, you will get a playable, good or great sounding instrument, which will hook you for life.

On the other hand, if you have good tool skills, I am aware of lots of builders who scratch built their first instrument and some of them have turned out amazingly well. It is mostly up to your comfort level.

And welcome!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/