Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
new spray booth (pic) http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13386 |
Page 1 of 1 |
Author: | Robbie O'Brien [ Sat Aug 25, 2007 6:35 am ] |
Post subject: | |
I just got my new OSHA approved spray booth up and running. It looks a bit small from the outside but it is actually quite roomy on the inside. Robbie ![]() |
Author: | jhowell [ Sat Aug 25, 2007 6:54 am ] |
Post subject: | |
Too cool! I see that you are using one of my favorite non-corrosive bridge finishes. ![]() |
Author: | Bruce Dickey [ Sat Aug 25, 2007 7:07 am ] |
Post subject: | |
![]() Not bad Robbie. Where is the exhaust fan bud? Oh, and are you using Ground Fault Circuit Interruption? ![]() |
Author: | Robbie O'Brien [ Sat Aug 25, 2007 7:27 am ] |
Post subject: | |
Notice the open window. Then creates a cross breeze that takes the fumes and overspray to the neighbor's house. I make sure to wear ear protection so I can't hear the neighbor's complaints. ![]() |
Author: | David Collins [ Sat Aug 25, 2007 7:30 am ] |
Post subject: | |
That's great - get a few of ventilators and have your kid's friends over to customize their bicycles. ![]() |
Author: | Don Williams [ Sat Aug 25, 2007 7:38 am ] |
Post subject: | |
I needed a good laugh! Great one Robbie. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Author: | Robbie O'Brien [ Sat Aug 25, 2007 8:53 am ] |
Post subject: | |
That's me in there. ![]() |
Author: | Robbie O'Brien [ Sat Aug 25, 2007 8:59 am ] |
Post subject: | |
Here I am in the booth applying a high tech polyester UV cured space age spray can finish to an electric guitar body. By UV cured I mean I left it in the sun for a bit. I told you the booth was roomy on the inside. haha ![]() |
Author: | Terry Stowell [ Sat Aug 25, 2007 2:39 pm ] |
Post subject: | |
![]() Bless your day bud. Thanks |
Author: | Don A [ Sat Aug 25, 2007 3:22 pm ] |
Post subject: | |
The outside and inside pictures remind me of the Tardis in Dr Who. ![]() |
Author: | Michael Dale Payne [ Mon Aug 27, 2007 6:58 am ] |
Post subject: | |
Where do you hang your god given I tech glue spreading tool? ![]() ![]() ![]() ![]() |
Author: | Michael Dale Payne [ Mon Aug 27, 2007 7:00 am ] |
Post subject: | |
EDIT!!!!! High Tech not I tech |
Author: | Robbie O'Brien [ Mon Aug 27, 2007 11:58 pm ] |
Post subject: | |
[QUOTE=MichaelP] Where do you hang your god given I tech glue spreading tool? ![]() ![]() ![]() ![]() ![]() ![]() |
Author: | Michael Dale Payne [ Tue Aug 28, 2007 12:01 am ] |
Post subject: | |
ROFLMAO |
Author: | burbank [ Tue Aug 28, 2007 1:28 am ] |
Post subject: | |
Robbie, That's hilarious! This needs to go into the next edition of your finishing DVD. |
Author: | joe white(old) [ Tue Aug 28, 2007 2:28 am ] |
Post subject: | |
Hey, with that dark green roof, you've got a bake booth on a sunny day! |
Author: | Steve Kinnaird [ Tue Aug 28, 2007 4:24 am ] |
Post subject: | |
Robbie, let me add my thanks for posting this. Every time I see your new booth, I get a laugh. Plus, it makes me feel better about MY booth! Steve |
Author: | Robbie O'Brien [ Tue Aug 28, 2007 6:56 am ] |
Post subject: | |
[QUOTE=burbank] Robbie, That's hilarious! This needs to go into the next edition of your finishing DVD.[/QUOTE] Well... now that you mention it. I will have a new DVD coming out soon and this spray booth appears in the DVD as well as a few of my new "high tech patent applied for tools" and a few other funnies. ![]() |
Author: | RHYANK [ Tue Aug 28, 2007 9:25 am ] |
Post subject: | |
Hey Robbie, Are you going to hold any French Polish classes in that new work area? If so, I hope you have assigned seating. |
Author: | Robbie O'Brien [ Wed Aug 29, 2007 1:21 am ] |
Post subject: | |
![]() No, the only French Polish class I have on the calendar at this point is a weekend class I will be giving in November at the college. The space and spray booth I have there is a "skoshe" bigger. |
Author: | letseatpaste [ Wed Aug 29, 2007 1:27 am ] |
Post subject: | |
My First Spraybooth |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |