I'm tap tuning a tenor uke. Currently I have a slightly sharp G and I should have a G#. Does taking more material off raise the pitch or lower it?
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Tap tuning - take more off? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13392 |
Page 1 of 1 |
| Author: | Ricardo [ Sun Aug 26, 2007 2:43 am ] |
| Post subject: | |
I'm tap tuning a tenor uke. Currently I have a slightly sharp G and I should have a G#. Does taking more material off raise the pitch or lower it?
|
|
| Author: | Ricardo [ Sun Aug 26, 2007 3:22 am ] |
| Post subject: | |
Looks like I've gone a bit too far? Thanks Hesh! |
|
| Author: | BlackHeart [ Sun Aug 26, 2007 5:12 am ] |
| Post subject: | |
How did you figure out your note? By ear? Can a guitar tuner help with this?
|
|
| Author: | Ricardo [ Sun Aug 26, 2007 6:51 am ] |
| Post subject: | |
Yes, I used a guitar tuner. held the soundhole near the pickup of the tuner and tapped near the bridge location. Don't know if this is the correct procedure. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|