Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Headstock refinish, NYS luthier?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13670		 Page 1 of 1
Author:  Michael Holmes [ Mon Sep 17, 2007 4:50 am ]
Post subject: 
I bought a Used 00028EC Martin, and it has two BUBBLES between the tuners on one side of the headstock. It looks like maybe a reaction to a Wall hanger. They look like a blister would look on your skin when popped open. How can I find a luthier in NYS. I am in Florida, NY, near West Point. These are small, the soze of a pea or less. Should I dad som clear or crazy glue in there to stop the spread?
Author:  DP LaPlante [ Mon Sep 17, 2007 5:45 am ]
Post subject: 
Stay away from the crazy glue.......for Martin touch ups try Alex Grey in Chestertown NY, Steve Kovacik in Scotia (518-381-3958) or David Nichols (custome Pearl Inlay) in Malone. 
Author:  Michael Holmes [ Mon Sep 17, 2007 6:10 am ]
Post subject: 
[QUOTE=DP LaPlante]Stay away from the crazy glue.......for Martin touch ups try Alex Grey in Chestertown NY, Steve Kovacik in Scotia (518-381-3958) or David Nichols (custome Pearl Inlay) in Malone. [/QUOTE]
Author:  Michael Holmes [ Mon Sep 17, 2007 6:11 am ]
Post subject: 
I will try to find some contact information for Alex Grey and try to send some pics so he can see what I am reffereing to, thanks for the help, I think Scotia is about the same distance more or less as well.
Author:  Rod True [ Mon Sep 17, 2007 6:54 am ]
Post subject: 
Michael have a look at our own Evan Gluck in NYC to help you out. Seems like he would be the closest to you.

New York Guitar Repair
Author:  DP LaPlante [ Mon Sep 17, 2007 11:21 am ]
Post subject: 

Michael, How old is this guitar? Martin had a problem a while back with finish "blistering" due to a bad batch of filler. Sounds like this might be one of them......


 


Best


 
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/