| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Paging Michael Payne http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13802 |
Page 1 of 1 |
| Author: | Rod True [ Thu Sep 27, 2007 8:34 am ] |
| Post subject: | |
Hey Michael, I was looking through the archives on neck jigs (I'm nearly finished my Woolson neck jig) and I came across this post of yours, fretboard to neck jig and was wondering if you ever finished it and if you have some pictures you could share. 
|
|
| Author: | Michael Dale Payne [ Thu Sep 27, 2007 8:48 am ] |
| Post subject: | |
No Rod I have been do it on my go-bar deck instead. I use a couple of simple cauls that have felt in a relief to match neck profile and use go-bars. I still want to make it but got too busy at work to build the fixture |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|