***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 2:48 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
Mike Mahar
 Post subject:
PostPosted: Mon Oct 01, 2007 2:11 am 
Offline
Koa
Koa

Joined: Sun Jan 02, 2005 1:38 pm
Posts: 1105
Location: Amherst, NH USA
Focus: Build
Status: Amateur
I have to attach an ivoriod heel cap onto a 70s era Martin D12-35. If I were building a guitar I'd use C.A. glue or Weld-on. I could then scrape or sand off any squeeze out prior to finishing. What should I use to reattach this heel cap without damaging the original finish?

I could use too little glue so that there is no squeeze out but I don't want the repair to come back. If it was a wood cap I'd use hot hide glue because that can be easily removed from the finish without damaging it. I've heard wiping acetone on ivoriod and then gluing with Titebond but I've never tried it. Titebond squeeze out is pretty easy to remove from a finished surface.

Any suggestions?
Top
 Profile  
 
Bruce Dickey
 Post subject:
PostPosted: Mon Oct 01, 2007 3:12 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Titebond or LMI glue for the reason mentioned Mike.
Good luck.

_________________
http://www.dickeyguitars.com
Top
 Profile  
 
Bob Garrish
 Post subject:
PostPosted: Mon Oct 01, 2007 6:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
If hide will stick, then I'd use that. It sticks to a lot of stuff you wouldn't expect it to...

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com