Hi Steve,
just got these babies 8x1 3/4x 7/12"
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Preferences for bridge blanks.. http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1398 |
Page 1 of 1 |
| Author: | pakhan [ Sat Mar 19, 2005 9:40 am ] |
| Post subject: | |
Hi all, I'm just wondering what was everyone's preferences for bridge blanks? As in cut and dimensions? Warmest Regards, Terence www.goodacoustics.com |
|
| Author: | Steve Kinnaird [ Sat Mar 19, 2005 3:18 pm ] |
| Post subject: | |
Hi Terence, 3/8" thick, 1 1/2" wide, 7" long. These be minimum dimensions. I'm not overly fussy about dead quarter or not. Grain can lean a bit. Probably better. Whatcha got? Steve |
|
| Author: | pakhan [ Sun Mar 20, 2005 5:30 am ] |
| Post subject: | |
Hi Steve, just got these babies 8x1 3/4x 7/12"
|
|
| Author: | Don Williams [ Sun Mar 20, 2005 6:25 am ] |
| Post subject: | |
Those look amazingly like the Brazilian Rosewood blanks recently stolen from my shop...please return them! 
|
|
| Author: | Don A [ Sun Mar 20, 2005 7:05 am ] |
| Post subject: | |
I'm betting those will work just fine  I like a finished height of 5/16" so you've got plenty to work with.
|
|
| Author: | pakhan [ Sun Mar 20, 2005 9:43 am ] |
| Post subject: | |
Thanks guys. I'm going to keep these guys for the future but will probably try to bring in more stuff to sell on. I'll try to sort something out with Lance. Warmest Regards, Terence. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|