Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Waddy’s Widdle Widgets
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=13990
Page 1 of 1

Author:  WaddyThomson [ Wed Oct 10, 2007 3:05 pm ]
Post subject: 







I don't have a lot of stuff, but maybe a couple of tradeable items or a bargain.  Will consider trades of multiple items for a Euro Top.

Shipping is the responsibility of the purchaser.  All shipping will be billed at actual cost.  PayPal and personal checks accepted.

Wagner Safety Planer - Brand New, in box  - $35.00  SOLD - PARAMES
 



Hock Chip Breaker - #3 - 1 3/4 wide.  Brand new, never opened $20  Sold - Nathan



12 fret, bandsaw cut, neck blank.  Small chip in edge.  2 3/8" wide - $25.00  I know it is too narrow for a classical, if too narrow for a steel string, tell me and I'll use the wood for something else.  25+ years old.
 

18 Spool Clamps, bought at last Swap Meet, Never used, $15 for the lot.  SOLD - PARAMES


Horn saddle blanks, black, 3 1/2" x 3/8" x 1/8" - $1.00 each



Classical rosettes, 4 1/8 inside Diameter - 5 3/16 OD for larger body with 3 7/8 - 4" sound hole.  $5.00 ea.
 


Ebony Bridge blank 8" x 1 7/8" x 1/2" - $3.00 (black everywhere but that little corner.)


This is waaay off the Reservation, but I have and am interested in selling a DuMont 304-A, Cathode-Ray Oscillograph.  It is an all tube unit, and I have the manual that came with it.  It is in good working condition. Here are some pictures both inside and out.  Don't really know about price.  Willing to consider offers. Something around $50 would be nice.  Shipping will probably be in the $25 - 30 range via UPS ground.  Ii will also throw in a probe and an adapter so it will fit the unit.  I thought I was going to learn how to use it, but never did.  I never even had a good wave generator for calibrating it correctly.  So if you're into vintage electronics gear, this is the item for you.
 
 


Author:  Parames B [ Mon Oct 15, 2007 1:05 am ]
Post subject: 

Waddy, I'll take the Wagner

Author:  Parames B [ Mon Oct 15, 2007 1:10 am ]
Post subject: 

Waddy, are all spool clamps the long ones? If so, I'll take those also.

Author:  WaddyThomson [ Mon Oct 15, 2007 1:40 am ]
Post subject: 

You got both items.  The Spool clamps are the large ones.  I'll need a name and other information. I'll have to learn about shipping to Thailand, but I'm sure it isn't so hard.  You can PM me the details, so you don't have to post your info on the forum.

Author:  WaddyThomson [ Mon Oct 15, 2007 2:08 am ]
Post subject: 

Parames, I can't even figure the cost of shipping until I get some details from you.  5 lbs at priority mail rates would be in the  $150+ range.  You sure you want to do that?  The stuff isn't even worth that.  I know it is probably hard to get stuff, so maybe we can work something out by combining stuff from a couple of other members.  We'll see.  Get me the postal codes, city and all that stuff though, so we can see what the cost will actually be.  If you change your mind, let me know so I can get the items back in the sale.

Thanks


Author:  WaddyThomson [ Mon Oct 15, 2007 2:12 am ]
Post subject: 

I was wrong.  5 lbs flat rate is only about $35.00 - that's not so bad.  We still might be able to work out a group ship, if you would be willing to pay the domestic shipping to a single international shipping point.  It is worth exploring.

Author:  nathan c [ Mon Oct 15, 2007 11:25 pm ]
Post subject: 

Hey Waddy, I'll take the Hock #3 chip breaker.

Author:  WaddyThomson [ Tue Oct 16, 2007 1:10 am ]
Post subject: 

OK, Nay, it's yours.  PM me your address, and I'll send you the info on the total with shipping.  Should be able to do it in an envelope.  It won't ship before tomorrow, though, since I don't have it here at my office.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/