Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Tim’s Stuff
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14043		 Page 1 of 2
Author:  Tim McKnight [ Sat Oct 13, 2007 12:24 pm ]
Post subject: 
Sold to Outstrung - Early 1950's Sitka Jumbo (outer side partially) carved top (nice) $75 shipped

Sold to Bradway Petersn 450 Strobe tuner in excellent condition $150 shipped

Black plastic end pins $5 shipped for the bag


Ebony end pins $1.50 each, shipped


White plastic end pins $5 for bag, shipped


5 sold to Westex93, 10 sold to Zehley, 10 to Jhowell, 10 to GregH. Lots more available Osage Orange bridge plates or bridge blanks, $1.50 each, shipped. Specify Quarter or rift sawn.


Classical size, Big Leaf Maple set, $40 shipped


sold to Zehley. Practice side sets, Ipe, Hickory, Pau Ferro, all $30 shipped

5 sets sold to Bradway. Price reduced to $15.00 for the remainder Neck hardware, $20 for box, shipped


1 Bag sold to kMartin, 1 bag to GregH. 2 bags left Neck, barrell bolts, $15 / bag, shipped


sold to Jim Hall Birdseye Maple practice sides (2) sets, $30 shipped

1 set eb & boxwood pins sold to Lex_luthiuer. Lots more left. *** PINS ARE UNSLOTTED *** RW, Ebony or Boxwood bridge pins, $5 / set shipped


Douglas Fir tops (tight grain), 8" x 20-3/4", 4 sets, $45 each shipped


Engelmann tops, tight grain and creamy white, $45/set shipped


2 Big Leaf maple Jumbo backs, dated 1958, $125 for both, shipped


Jumbo Big Leaf (outer) partially carved back, nice, 1950s, $75 shipped.


2 rolls of cloth bias tape, 1" wide by ? (long), $25 for both, shipped


Panama RW bridge blanks. 4 per bundle, $20 shipped.


1 unopened quart of satin finish (for necks). $20 shipped.


9 Ash practice sides. $25 shipped.


ALL SHIPPING IS BASED ON SHIPPING WITHIN THE CONTINENTAL US. I will combine shipping on multiple purchases (actual freight). Paypal preferred.



Author:  Brock Poling [ Mon Oct 15, 2007 1:03 am ]
Post subject: 

Hey Tim...

I will lay claim to that LMI rosette cutter.

Author:  Peter Pii [ Mon Oct 15, 2007 1:08 am ]
Post subject: 

hi tim


i'll buy your rossette cutter
Author:  Dave Rickard [ Mon Oct 15, 2007 1:13 am ]
Post subject: 
Tim I'l take the reamer
Author:  James Ringelspaugh [ Mon Oct 15, 2007 1:18 am ]
Post subject: 
I'd like the ebony and boxwood bridge pins.
Author:  L. Presnall [ Mon Oct 15, 2007 1:29 am ]
Post subject: 
Brace jigs Tim!
Author:  Steve Walden [ Mon Oct 15, 2007 1:54 am ]
Post subject: 

Tim - I will take all the bridge plates.


Thanks,
Author:  Marc Lupien [ Mon Oct 15, 2007 2:50 am ]
Post subject: 
Tim, could you give the dimensions of the Classical size, Big Leaf Maple set, $50 shipped ?

Thank's

Marc
Author:  Chris Oliver [ Mon Oct 15, 2007 3:23 am ]
Post subject: 
Tim, if you have any more sets of ebony or boxwood bridge pins, I'll take a set of each.
thanks,
chris
Author:  Tim McKnight [ Mon Oct 15, 2007 3:48 am ]
Post subject: 
Do you want one set of each or all that I have?
Author:  Tom Barton [ Mon Oct 15, 2007 8:10 am ]
Post subject: 

Hi Tim -


I'll take the KTM9, if it's still available.  (Don't tell Rick T.)


Thanks!


Tom


 
Author:  Burton LeGeyt [ Mon Oct 15, 2007 9:06 am ]
Post subject: 
Hi Tim!

Is that the strobe tuner that will register tap tones off of a free plate or a box? I know there is one that will and then one that is mostly for high quality guitar tuning. If it is the one that will register tap tones, would i need an external mic for it?
Thanks,

Burton
Author:  L. Presnall [ Mon Oct 15, 2007 11:09 am ]
Post subject: 
Are you a Paypal man Tim? And if so, what's your Paypal name?
Author:  Tim McKnight [ Mon Oct 15, 2007 12:30 pm ]
Post subject: 
Burton,
Yes, this is the one that can be used for tap tuning and it comes with a clip on transducer mic.
Author:  Tim McKnight [ Mon Oct 15, 2007 12:31 pm ]
Post subject: 
My Paypal addy is igolfat8 [at] yahoo [dot] com
Author:  Tim McKnight [ Mon Oct 15, 2007 12:35 pm ]
Post subject: 
[QUOTE=MLupien] Tim, could you give the dimensions of the Classical size, Big Leaf Maple set, $50 shipped ?Thank'sMarc
[/QUOTE]

Backs - 9" x 30"
Sides 5-3/4" x 29-7/8"
Author:  Tim McKnight [ Mon Oct 15, 2007 12:38 pm ]
Post subject: 
Items below are sold to:

Broc- Rosette cutter - $135.00
Dave Rickard - 3* reamer - $12.00
Larry P. - Brace jigs - $20.00
TomsOM28 - KTM9 - $50.00
Bradway - Tuner - $150.00
Lex_Luthier - 1 set of Ebony & Boxwood bridge pins - $10.00
Westex92 - 5 Osage bridge plates, rift- $7.50
kMartin - 1 bag barrel nuts - $15.00
Outstrung - Sitka archtop - $75.00
Jim Hall - Birdseye Maple sides - $30.00
J Howell - 10 Osage bridge plates, rift - $15.00
Author:  outstrung [ Mon Oct 15, 2007 12:47 pm ]
Post subject: 
Tim, If you still have the spruce top available, Ill take it.
Author:  Burton LeGeyt [ Mon Oct 15, 2007 1:12 pm ]
Post subject: 
Tim,

Thanks for the update. Would you have any interest in a trade for one of the Sapele sets on my page? If you need close-ups it is no problem. If you want cash I will have to think about it but will probably still get it. I may need to ask some questions on how to use it. Thanks,

Burton
Author:  Tim McKnight [ Mon Oct 15, 2007 1:13 pm ]
Post subject: 
Not really interested in trades at this point. I will be glad to offer some suggestions on how to use the tuner.
Author:  Brad Way [ Mon Oct 15, 2007 2:09 pm ]
Post subject: 
Tim...I will take the tuner if still available.

Thanks!
Author:  Steve Saville [ Mon Oct 15, 2007 2:11 pm ]
Post subject: 
TIm,
What are the dimensions of your Osage Orange bridge plates?
Author:  Brad Way [ Mon Oct 15, 2007 2:14 pm ]
Post subject: 
I am also interested in your neck hardware but only need a few sets...maybe 5 total.

What can you offer?
Author:  James Ringelspaugh [ Mon Oct 15, 2007 2:29 pm ]
Post subject: 
Sorry I wasn't clear Tim, I'll take one each of the ebony and boxwood bridge pin sets for a total of $10.

Author:  Wes McMillian [ Mon Oct 15, 2007 3:46 pm ]
Post subject: 
Tim, I'll take 5 osage bridge plates, if they're available, rift sawn.

Thanks!
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/