| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Bandsaw blade http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1406 |
Page 1 of 1 |
| Author: | Colin S [ Sun Mar 20, 2005 3:50 am ] |
| Post subject: | |
Advice from all you machine experts please. I'm off to buy some new bandsaw blades for my 14" Bench Power, need a new blade for rough cutting out tops and backs and side profiles. What TPI are you all using? I currently run a half inch, 0.015", 24 TPI, would going to the 32 TPI be any improvement. Colin |
|
| Author: | Dickey [ Sun Mar 20, 2005 11:02 am ] |
| Post subject: | |
Colin, Olson 93 1/2 " 6TPI 1/4" Skip Tooth Raker for $8.49 each at Ace Hardware is what I use in my Delta 14" and love 'em. It is capable of sawing solid genuine mahogany neck blanks all day long, just a great little blade. (I knew you'd like the mahogany reference.) Oh and I use it for profiling backs and tops too. They got six in at my local store if you can't find any.Link to another post on this very subject.... Pics too... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|