Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Brock Poling’s Stuff
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14065		 Page 1 of 1
Author:  Brock Poling [ Sun Oct 14, 2007 2:50 pm ]
Post subject: 

I have a few things I am selling.

All work great.

1. A Selmer mold made by Blues Creek

2. A J200 mold -- again made by Blues Creek.

3. A Taylor X12 Mold (with a bending form) -- again... blues creek.

4. A Woolson neck jig. It is not cosmetically pure. It has a few extra holes drilled in it for truss rod alignment and fitting for the SM hot rod. I also dug a big crevice in the front to allow necks with the head plate already attached to fit on the jig. It works great, it is just not cosmetically pure.


I am willing to trade these are sell them.

Any mold is $50
The bending mold is $20
And the Woolson Neck Jig is $85

Let me know if you are interested.

Shipping will be the actually cost.



Author:  rlabbe [ Mon Oct 15, 2007 1:07 am ]
Post subject: 
I'll take the neck jig.
Author:  Brock Poling [ Mon Oct 15, 2007 1:30 am ]
Post subject: 

You got it. Shoot me a PM or email with your address and I will get you a shipping cost.

Thanks!

Author:  Steve Walden [ Mon Oct 15, 2007 1:41 am ]
Post subject: 

Brock - I'll take the Taylor *12 mold and bending form.


Thanks for doing all this! My adrenaline is pumping!
Author:  Brock Poling [ Mon Oct 15, 2007 1:43 am ]
Post subject: 

You got it.

Send me your address and I will get a shipping quote for you.

Author:  Kirt Myers [ Mon Oct 15, 2007 2:16 am ]
Post subject: 
Hi Brock,

Is the selmer mold for the oval soundhole style or the large "D" hole, or are they one in the same.

Thanks,
Kirt
Author:  Brock Poling [ Mon Oct 15, 2007 3:14 am ]
Post subject: 

I think they are one in the same... but I am not 100% certain of that.

I will throw in a plan too if you want it. (It is in french though)
Author:  Kirt Myers [ Mon Oct 15, 2007 3:58 am ]
Post subject: 
Hey Brock,

Just did some checking and the 2 bodies are the same size. If that's an oval soundhole plan I'll take em..

Kirt

Author:  Brock Poling [ Tue Oct 16, 2007 1:54 pm ]
Post subject: 

It is the round hole plan.

I boxed it up for you tonight.   
Author:  Kirt Myers [ Wed Oct 17, 2007 12:09 am ]
Post subject: 
Thanks Brock,

Did you mean oval hole instead of round hole?

Doesn't matter I'll take it anyway.

I'll PM my address to you.

Thanks,
Kirt
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/