Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Hibdon Hardwood enters the swap...
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14115
Page 1 of 1

Author:  Hibdon Hardwood [ Wed Oct 17, 2007 2:26 am ]
Post subject: 

All items listed are priced without s/h.  Items will be shipped via UPS Ground.  OLFers outside the U.S. please contact us for shipping info.  Payment methods are PayPal (auctions@hibdonhardwood.com), VISA and MC.


Due to C.I.T.E.S. restrictions Genuine Honduras Mahogany is available for shipping ONLY in the U.S


S1- Honduras Rosewood Back and side set with sap wood


Dims: 22" x 8-1/4" back; 32-1/2" x 5-1/8" sides This set is clean, without defects and ready to build. $185.00



S2- Nine Honduras Rosewood fingerboards  These are all thickness sanded to min. 5/16".  Sizes are listed on each fingerboard.  Some of these are quartered, others are rift sawn.  $29.99



S3- Three sets of African Blackwood sides  These three sets are perfect for the builder who laminates their sides.  These sets have a few minor defects listed on each set; mostly some tiny wormholes and knot shadow.  One half of the middle set is thin (.090")  The other side sets are at least .180"  $329.99 SOLD



S4- One Cocobolo Back and side set.  This set has some unusual figure and rings like a bell.  Some stable knots and knot shadow. $99.99 SOLD




S5 Three genuine Honduras Mahogany 3"x4"x30" billets.  Very nicely quartered and ready to build.  $216.00 SOLD




Thanks for taking a look.  Please let us know if there is anything else you'd like to see in the swap.


Author:  BobK [ Wed Oct 17, 2007 2:30 am ]
Post subject: 

I'll take the neck blanks.


Thanks,


Bob


Author:  KenH [ Wed Oct 17, 2007 2:31 am ]
Post subject: 

I'd like to see bracewood in the auction. especially adi bracewood.


Author:  Hibdon Hardwood [ Wed Oct 17, 2007 2:35 am ]
Post subject: 

BobK the necks are yours (feel free to call in, PM, or PayPal), I'll get some more together and post 'em in a bit.


For bracewood we've got some 30lb mahogany bundles.  More images to follow.


Author:  Brock Poling [ Wed Oct 17, 2007 4:14 am ]
Post subject: 


I will take the African Blackwood sides.


Author:  old man [ Wed Oct 17, 2007 4:15 am ]
Post subject: 

If you have more of those neck blank billets just like the ones above (I need that 3 1/4" width), I'd buy three of those.

Ron

Author:  Hibdon Hardwood [ Wed Oct 17, 2007 4:52 am ]
Post subject: 

Brock these sides are yours.  Do you need anymore?  We have _a lot_ of African Blackwood sides, as well as some Cocobolo and most of the other species on our site.


Ron, I believe we do have a few more 3-1/4"x4"x26-1/2" and maybe some 30".  FYI the 3-1/4" width is rough sawn.


More images in a few moments...


Author:  Bart [ Wed Oct 17, 2007 5:16 am ]
Post subject: 

I'll give the S4 Cocobolo Back and side set a good home.


Bart Hovis


Author:  old man [ Wed Oct 17, 2007 5:26 am ]
Post subject: 

[QUOTE=Hibdon Hardwood] Ron, I believe we do have a few more 3-1/4"x4"x26-1/2" and maybe some 30". FYI the 3-1/4" width is rough sawn.[/QUOTE]


Understood. I prefer the 30" pieces, but will take three of the 26 1/2" if that's all you have.

Ron

Author:  Hibdon Hardwood [ Wed Oct 17, 2007 5:28 am ]
Post subject: 

Thanks everyone for your interest so far...


Thank you Bart, Coco set S4 is yours for the taking. 


If you have yet to pay for your items we will be posting more items throughout the day.  Please be sure include the item # (ie S4 Cocobolo).


From this first round the Honduras Rosewood B/S set S1 and the HRW fingerboards S2 are still available. 


Here come some new items...


Author:  peterm [ Wed Oct 17, 2007 5:29 am ]
Post subject: 

I'll take 3 neck blanks too. I prefer the 30" pieces, but will take three of the 26 1/2" if that's all you have.

And then you can pack them up with that set of blackwood sides you've been holding for me!

Author:  Hibdon Hardwood [ Wed Oct 17, 2007 5:36 am ]
Post subject: 

S6- Three Honduras mahogany billets see image for dims. $209.99 SOLD


 Ron these are just under 3-1/4", you can see the sides (4" face) are rough sawn.





S7- Two Cocobolo side sets.  These two sets are flitch matched (cut from the same 4/4 piece of lumber).  These would be great for a 4 piece back or for those who like to laminate sides.  Beautiful contrast in these sides!



There will be more listed in a bit, thanks so much for looking...


Author:  Hibdon Hardwood [ Wed Oct 17, 2007 6:02 am ]
Post subject: 

Peter et al, we do have some nice 3x4x30s as well as 24".  These listed were just over 3" wide in the rough.  I still have the two sets of Blackwood sides on hold for you too.


Thanks again for taking a look, here come some more items...


Author:  peterm [ Wed Oct 17, 2007 6:05 am ]
Post subject: 

[QUOTE=Hibdon Hardwood]

<FONT face="Times New Roman, Times, serif" size=3>Peter et al, we do have some nice 3x4x30s as well as 24".  These listed were just over 3" wide in the rough.  I still have the two sets of Blackwood sides on hold for you too.


<FONT face="Times New Roman" size=3>Thanks again for taking a look, here come some more items...

[/QUOTE]
Thanks,
If the 24" long are less expensive I will take 3 of those!

Author:  Brock Poling [ Wed Oct 17, 2007 6:10 am ]
Post subject: 

[QUOTE=Hibdon Hardwood]

<FONT face="Times New Roman, Times, serif" size=3>Brock these sides are yours.  Do you need anymore?  We have _a lot_ of African Blackwood sides, as well as some Cocobolo and most of the other species on our site.

[/QUOTE]

Yeah, those two koa side sets we discussed via email would be cool...

Author:  Hibdon Hardwood [ Wed Oct 17, 2007 6:20 am ]
Post subject: 

In the previous post with the Cocobolo flitch sawn sides I forgot to list the price.  S7- $109.99


S8- Two sets of Cocobolo sides; perfect for sides lams. $99.99  One side of one of these sets is thin (approx. .090")



S9- Cocobolo Back and side set $99.99  This set has a few stable knots and knot shadow.



S10- 30lbs genuine Honduras Mahogany cut offs for bracing stock, ukes, lining, etc...  $29.99  Mostly QS, some knots, sap wood and other defects scattered throughout.  This is all 4/4 (1") lumber; widths range from 1-1/4" to 3-1/4" all stock is 30" long.




If there is anything you have received from us and may like to see in the swap, do not hesitate to ask.  OLF subscribers feel free to use your Hibdon OLF offer for some of these items.  You must mention the offer before payment!


 


Author:  James W B [ Wed Oct 17, 2007 10:43 am ]
Post subject: 

Are the knots on the sides bendable?I`vwe had trouble bending knots before.
               James

Author:  Hibdon Hardwood [ Fri Oct 19, 2007 7:28 am ]
Post subject: 

James, we hear from quite a few builders who bend sides with knots.  Flooding the area around the knots with CA seem to do the trick.  Though the ultimate suitability of these sides for bending will be up to the buyer.

Author:  Tim McKnight [ Thu Oct 25, 2007 11:59 am ]
Post subject: 

Andrew,
You had some figured Honduras Mahogany on a monthly special a few months back. Is it possible to get some more of that at the same or better "Swap Shop" price? If so I will take 20 sets.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/