| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Cost to Outsource Finish http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14188 |
Page 1 of 1 |
| Author: | Parser [ Mon Oct 22, 2007 10:39 am ] |
| Post subject: | |
I'm looking to do a few builds in the near future and was wondering how much is reasonable to pay for finishing? I'll be building acoustics and electrics. I'd be very interested in hearing what type of cost to expect to outsource various types of finishes. Thanks in advance for any experiences you may be able to share! |
|
| Author: | LanceK [ Mon Oct 22, 2007 10:47 am ] |
| Post subject: | |
350.00 to 400.00 |
|
| Author: | Rick Turner [ Mon Oct 22, 2007 10:51 am ] |
| Post subject: | |
Bear in mind that when I worked for Gibson in the late 1980s we had finish as about 1/3 of the total labor load in a guitar in the Nashville plant. Yes, it's that much on a fairly standard guitar. The fraction goes down the more inlay and fancy stuff you do, but on a normal bound and purfled guitar with dot inlays, that's about right. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|