Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

New A4 Kerfing Question
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14396		 Page 1 of 1
Author:  charliewood [ Tue Nov 06, 2007 4:51 am ]
Post subject: 
OLFers
I was wondering lately...
I remember there was a thread a while ago where the Ryan A4 kerfing was discussed and then later in the thread it was offered for sale - I saw alot of people getting in on it, and I wanted to buy some badly as well, however I just couldnt afford it at the time!

I was wondering what the verdict was>?
Has anyone been building with it?
And what is thier opinion on it?
How well it compliments the instrument, how much more ease does it contribute to the kerfing stage of building the instrument, noticeable top resonance results? etc, etc
I figured there would have to be some reactions by now..
mabye there was a discussion and I missed it, I was away from the OLF for a while this summer,,,

Also, I still would like to purchase some for myself, being somewhat flush at the moment, did I miss the boat?
Or is there any way I could come by some without making my own?
Thanks in advance, for your input..
Cheers
Charliewood   
Author:  GregH [ Tue Nov 06, 2007 6:01 am ]
Post subject: 

[QUOTE=charliewood] OLFers

I was wondering lately...

I remember there was a thread a while ago where the Ryan A4 kerfing was discussed and then later in the thread it was offered for sale - I saw alot of people getting in on it, and I wanted to buy some badly as well, however I just couldnt afford it at the time!


...


Also, I still would like to purchase some for myself, being somewhat flush at the moment, did I miss the boat?

Or is there any way I could come by some without making my own?

Thanks in advance, for your input..

Cheers

Charliewood   

[/QUOTE]

Adapting a quote from the Fabulous Furry Freak brothers -

"Zoot will get you through times of no money, better than money will get you through times of no zoot"
Author:  Michael Dale Payne [ Tue Nov 06, 2007 6:01 am ]
Post subject: 
Charlie,

I have some 3a and 4a kerfing I will send you for free if you pay the shipping. In fact I will sweep up the floor and get it ready for you tonight

Just joking with you of course I know you are referring to linings but there is an on going joke around her about kerfing. Kerfing being the the saw dust form making kerf cuts in linings. and being the wise mouth I am I could not resist
Author:  erikbojerik [ Tue Nov 06, 2007 6:20 am ]
Post subject: 
Michael beat me to it...



On another forum I frequent, there is a guy who collects all the photos
of builders who happen to catch their feet in the shot.  You can
tell a lot about a person from their footware....or sockware....or nail
care. 


Author:  Steve Walden [ Tue Nov 06, 2007 7:24 am ]
Post subject: 

Charliewood said:
"Also, I still would like to purchase some for myself, being somewhat flush at the moment, did I miss the boat?"


Charlie, since you are so flush can you share some with the rest of us??  I'll take a fifty!


As to the linings, I'll let the others fill you in.
Author:  Steve Walden [ Tue Nov 06, 2007 7:30 am ]
Post subject: 

Well, in the interest of helpin out...


Here's the link to the archived discussion.  PeterM started the thread:


http://luthiersforum.3element.com/forum/forum_posts.asp?TID= 12043&KW=Ryan+A4+#forumTop


Good huntin!
Author:  peterm [ Tue Nov 06, 2007 8:18 am ]
Post subject: 
I started that thread.... Kevin is still working on the details. I will find out soon what the final decision will be on selling the A4 kerfing.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/