Tried something new , how's it look
Lance
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| New Bevel http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14436 |
Page 1 of 2 |
| Author: | McCollum [ Thu Nov 08, 2007 6:35 pm ] |
| Post subject: | |
Tried something new , how's it look Lance
|
|
| Author: | Kevin Gallagher [ Thu Nov 08, 2007 6:51 pm ] |
| Post subject: | |
Lance, That is a great design. I like it better than both of the bevels that have become so common lately. I love Kevin Ryan's with it seamless transitions where it interfaces with the binding at either end, but have always loved the graceful and interesting recurve at each end of the Lasking style bevel and miss them a little with the move by so many to the newer, smoother modern variation. Your bevel incorporates what I consider the best of both worlds, but with a unique and artistic sensitivity that has always been typical of McCollum guitars. I'm sure it's even more striking in person. It's inspiring. Regards, Kevin Gallagher/Omega Guitars |
|
| Author: | Bruce Dickey [ Thu Nov 08, 2007 9:49 pm ] |
| Post subject: | |
Lance, You've taken the plunge many of us would love to try as well. Congratulations on a great execution of the bevel. What kind of wood is that, for some reason the bevel wood type escapes me? 
|
|
| Author: | bob J [ Thu Nov 08, 2007 10:09 pm ] |
| Post subject: | |
What can be said, magnificent!! BTW, for those who craft this type of arm-rest and also include a number of sound ports; are there warning signs to prevent persons from standing too near port air exits--like 'stand back-- Danger Jet Wash" 
|
|
| Author: | LanceK [ Thu Nov 08, 2007 10:54 pm ] |
| Post subject: | |
Lance, it looks great, do you have any other shots of it? Something that would show how it looks face on with the whole guitar? Very nice!
|
|
| Author: | Matt Gage [ Fri Nov 09, 2007 12:01 am ] |
| Post subject: | |
I like it better than any others i have seen. to me, this design is less invasive to the outer area of the top, so in my mind, less tone is sacrificed for comfort. a happy medium, nice one! Matt |
|
| Author: | John K [ Fri Nov 09, 2007 12:04 am ] |
| Post subject: | |
I like it Lance. Very creative. Is that bubinga binding? |
|
| Author: | JJ Donohue [ Fri Nov 09, 2007 12:36 am ] |
| Post subject: | |
Nice Lance! I also would like to see a wider shot to get a sense of the full effect. Thanks for posting. |
|
| Author: | Don Williams [ Fri Nov 09, 2007 12:57 am ] |
| Post subject: | |
Sweet! I like it too. It's very organic looking. |
|
| Author: | Hesh [ Fri Nov 09, 2007 1:06 am ] |
| Post subject: | |
Beautiful work Lance - thanks for posting this!
|
|
| Author: | grumpy [ Fri Nov 09, 2007 2:03 am ] |
| Post subject: | |
Sweet! I'm cutting an armrest(only my second one) today, in fact, and the client and I debated which style to go with, as we like either one. As has been said, you've covered both in one swoop. Very cool! Mind if I propose this to my client? Full credits to ya, of course! |
|
| Author: | McCollum [ Fri Nov 09, 2007 2:44 am ] |
| Post subject: | |
Thanks guys. Lance, I'll get you a full front shot today when I finish sanding the rest of the guitar. I can't take full credit for it. I was inspired by the work of Mitsuhiro Uchida. I've posted his link here before http://www10.plala.or.jp/harp-g/Uchida-MagamookEng.htm He's amazing and a lot of the work you see coming out of the new Japanese luthiers has started with him. Whether the will admit it or not, he did it first! Look at the dates. I've already done a Laskin bevel and I didn't want to do the full Ryan bevel. I liked parts of both of them and the work of Uchida and that is what I came up with. The wood is the Sapele Zoot, which hides the joint lines very well. I also found that by not having any purfling on the bottom of the binding made it a lot easier to execute. Here is a picture of the bearing guide I came up with. 
Lance |
|
| Author: | Bill Greene [ Fri Nov 09, 2007 2:51 am ] |
| Post subject: | |
Yeah, that rocks without a doubt. |
|
| Author: | Mike Mahar [ Fri Nov 09, 2007 2:53 am ] |
| Post subject: | |
Lance, Very pretty armrest! I've always liked the Ryan rest better. It looks less like someone took a bite out of the guitar. The Laskin armrest looks like an after thought. Your design definitely doesn't look like an after thought. Grumpy, There is another, subtle, variation on the Ryan armrest that you might consider. In the Ryan rest, the top is asymmetrical because of the bevel. You could, however, make the top symmetrical and make the body asymmetrical by extending out the lower bout of the bass side. I've never done this or seen an instrument that did. The idea just popped into my head and I thought I'd mention it before I forgot about it. Although forgetting about it may be the right thing to do. |
|
| Author: | grumpy [ Fri Nov 09, 2007 4:03 am ] |
| Post subject: | |
Cool, I'll have to follow that link later this evening! Are you using a straight beveled cutter or a radiused one? if so, what radius? Hard to tell from the photo... |
|
| Author: | JHerrick [ Fri Nov 09, 2007 4:23 am ] |
| Post subject: | |
[QUOTE=grumpy] Are you using a straight beveled cutter or a radiused one? if so, what radius? Hard to tell from the photo... As long as we're asking: If its a straight bevel, what angle is the bevel?
Joe |
|
| Author: | JHerrick [ Fri Nov 09, 2007 4:28 am ] |
| Post subject: | |
Edit: I'm asking...because your bevel looks great. I've debating which bevel to try, and I'd like to try one like yours..... Any reason why you didn't "taper" both ends? Joe |
|
| Author: | McCollum [ Fri Nov 09, 2007 5:44 am ] |
| Post subject: | |
Joe because then it would look like a Ryan 
The cutter is 45 degreeheres a , I just rounded the edges over a little more pict 
Here  s the first one I did
Lance |
|
| Author: | Steve Saville [ Fri Nov 09, 2007 5:55 am ] |
| Post subject: | |
Lance, I'm working on my first bevel right now. Thank you for posting this. You got me rethinking how I'm going to do mine. How did you cut your binding ledges? |
|
| Author: | Mike Collins [ Fri Nov 09, 2007 6:47 am ] |
| Post subject: | |
Lance -I like your design very much! It looks very fluid or flows from one end to the other. And looks practical for the player also! Great work! Mike 
|
|
| Author: | Jim Watts [ Fri Nov 09, 2007 6:50 am ] |
| Post subject: | |
Lance, That looks great! Thanks for posting a picture of your bearing guide. It took me a minute to figure it out, but I got it. Makes sense. |
|
| Author: | grumpy [ Sun Nov 18, 2007 1:08 pm ] |
| Post subject: | |
Just took these shots for the owner, with it's first 3 coats of finish, and figured I'd share how it came out. I like how it doesn't jump out at your eyes as much, yet still keeps plenty of interest. Won't be my last one in this style, for sure, but most likely my last in flamed maple. Arrrrgh! thanks for sharing, Lance!   |
|
| Author: | FishtownMike [ Sun Nov 18, 2007 1:28 pm ] |
| Post subject: | |
Grumpy i like that a lot.
|
|
| Author: | KenH [ Sun Nov 18, 2007 1:42 pm ] |
| Post subject: | |
WOW these are really pretty guitars. Thanks for sharing the craftsmanship and tips! By the way Lance, I sent you a PM. |
|
| Author: | Bill Greene [ Sun Nov 18, 2007 2:14 pm ] |
| Post subject: | |
Gorgeous Mario...and even if the maple was a pain, the results are amazing. Bravo. Bill |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|