| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Watt Density and Bending Blankets http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14547 |
Page 1 of 1 |
| Author: | Brad Way [ Thu Nov 15, 2007 11:34 pm ] |
| Post subject: | |
I am building new bender with two blankets and am stuck between 2.5w/in? or 5w/in?. I am leaning towards the 5w/in? however it makes the electrical control more complicated because of the larger load. If I use the 2.5w/in? what will I be compromising? Thanks! |
|
| Author: | tippie53 [ Fri Nov 16, 2007 12:08 am ] |
| Post subject: | |
I have been bending with blankets for about 8 years. the wattage as noted will also help with thermo loss. I use 1 blanket 5 watts per inch. I just make sure of my temps. Like Todd , Mahogany and maple like the hot and dry. Rosewoods damp . Too much water is often more trouble than too little. In most cases just a light dampening is all you need. |
|
| Author: | Brad Way [ Fri Nov 16, 2007 11:26 am ] |
| Post subject: | |
Thanks for the feedback. I am still curious what people do to control two blankets that exceed 1000w (a typical dimmer setup). I am building a new style bender that I think will need a blanket on top and bottom (I will post pics later). |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|