| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Ambrosa maple for neck? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14791 |
Page 1 of 1 |
| Author: | Louis Freilicher [ Mon Dec 03, 2007 8:35 am ] |
| Post subject: | |
I have a customer who wants a new neck built for a strat type guitar. He was asking about the use of spalted maple for the neck wood, which I did not think was a good idea stability wise. The goal is for a streaky look to the maple. I think ambrosa would work for the looks, but what about stability? Thanks for you input! Louis |
|
| Author: | Bruce Dickey [ Tue Dec 04, 2007 1:25 am ] |
| Post subject: | |
You could use weaker wood, just epoxy in some graphite on either side of the truss rod and you'll be fine. I used Graphite in two 5 String Bass Necks and wow, I can jump up and down on those necks. |
|
| Author: | Mike Collins [ Tue Dec 04, 2007 6:48 am ] |
| Post subject: | |
Both maples can have soft spots and tiny cracks not visible till ya work the wood. I've done a spalt neck after inspecting it very carefully for defects and everyone who sees it just flips. I use allot of Ambrosia for rosettes and fine lots of defects like the beetle holes(Ambrosia beetle) and soft punky spots not at all usable for a rose so I'd be very carful using it for a neck! 
Mike www.collinsguitars.com |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|