| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 000 blueprint recommendations? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14855 |
Page 1 of 1 |
| Author: | J.R. Hunter [ Fri Dec 07, 2007 2:57 pm ] |
| Post subject: | |
I've been searching for 000 plans and have only found two. One at StewMac, the other at Elderly Instruments. Are there any others I should know about? Is one better or worse than another, or are they all basically the same? Thanks in advance for your help. Gotta get that list off to the N. Pole soon! J.R. |
|
| Author: | davidmor [ Fri Dec 07, 2007 3:32 pm ] |
| Post subject: | |
LMI has the 14 fret 000 by Scott Antes. I am just doing the final touches on two of these guitars. The bracing is a bit heavy on the plans so I lightened it up quite a bit. Both are very loud and beautiful sounding instruments. The Stewmac plan is a 12 fret 000 which has a different body shape than the Antes plan. I built one of those earlier this year and it is a great little guitar. |
|
| Author: | FishtownMike [ Fri Dec 07, 2007 3:42 pm ] |
| Post subject: | |
I have the 14 fret scott antes plan too. I got it from the site below. He has an ebay store. Pilgrims Project |
|
| Author: | JJ Donohue [ Fri Dec 07, 2007 4:31 pm ] |
| Post subject: | |
Ive use the SM 000-12 fret plans and found them great. |
|
| Author: | PaulB [ Fri Dec 07, 2007 11:06 pm ] |
| Post subject: | |
I've built two with the Stewmac plans. Never seen the Elderly plans. Guess I'll have to buy em now. |
|
| Author: | tippie53 [ Sat Dec 08, 2007 1:06 am ] |
| Post subject: | |
The only issue I have with the 2 plans is the bracing location is not true to Martin and Antes is over braced. other wise they are close enough. |
|
| Author: | J.R. Hunter [ Sat Dec 08, 2007 1:30 am ] |
| Post subject: | |
[QUOTE=ToddStock]I should also mention that John has tracing sets which show accurate brace locations, soundhole centroid, side profiles, and outline off the Martin factory templates. If you are to the point of not needing basic construction details off the Antes or McRostie drawings, John's stuff is a better bet. He's provided me with OOOO, D-12, and 00-12 & 00-14 tracing sets, none of which are available elsewhere.[/QUOTE] Todd, Who is John and where do I find these? I'm sure I do need basic const. details, but sounds like these might be good to have as well. Thanks, J.R. |
|
| Author: | J.R. Hunter [ Sat Dec 08, 2007 1:34 am ] |
| Post subject: | |
Thanks to everybody for your input. Sounds like whichever one the fat guy brings me I'll do okay...with a lot of help from y'all
Thanksamillion!! J.R. |
|
| Author: | tippie53 [ Sat Dec 08, 2007 3:11 am ] |
| Post subject: | |
I am still doing as much as I can. Thanks again for all the kind words. john http://www.bluescreekguitars.com email tippie@epix.net the tracings and patterns are not listed on the site but we do provide them |
|
| Author: | Wes McMillian [ Sat Dec 08, 2007 7:10 am ] |
| Post subject: | |
John, got any pics/description/pricing for the templates? |
|
| Author: | J.R. Hunter [ Sat Dec 08, 2007 7:41 am ] |
| Post subject: | |
[QUOTE=westex93]John, got any pics/description/pricing for the templates?[/QUOTE] You took the words right outta my mouth... J.R. |
|
| Author: | tippie53 [ Sat Dec 08, 2007 10:52 am ] |
| Post subject: | |
There are the picx LOL john |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
