I know, I know! I can't have my cake and eat it too....
I would like to vote for more than one...
Set-up, first guitar, bracing, repair, woods, voicing... the list goes on. If I had to choose one, it would be voicing.
Hesh, Great poll. Thanks!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 2008 OLF Topics of Interest http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=14954 |
Page 1 of 1 |
| Author: | Hesh [ Fri Dec 14, 2007 4:48 am ] |
| Post subject: | |
As 2008 approaches I am thinking about what my own learning and building goals are. As part of a two thread post I thought it would be interesting to ask the members what topics you would like to see more of on the OLF. Although it's impossible for me to think of everything that might be important to you I thought that I would give it a shot. If your topic is not listed above please add it below in this thread. If you had to pick the very most important topic of interest to you what would it be - please cast your vote in the poll. |
|
| Author: | Hesh [ Fri Dec 14, 2007 4:50 am ] |
| Post subject: | |
The first choice that I listed in the poll fell off the map when I hit "post" and it was set-up - new and existing instruments. So one vote from me for set-up discussions. |
|
| Author: | LanceK [ Fri Dec 14, 2007 5:26 am ] |
| Post subject: | |
Great poll Hesh! |
|
| Author: | JimWomack [ Fri Dec 14, 2007 5:27 am ] |
| Post subject: | |
Yup, I'd like to improve my setups too. And I'm always on the look-out for a clever, well thought out jig or tool. Good topic Hesh! |
|
| Author: | Michael Dale Payne [ Fri Dec 14, 2007 6:07 am ] |
| Post subject: | |
bracing - structural and tonal concerns are always important to me and I assume always will. In particular ones that deal with voicing techniques. |
|
| Author: | Steve Walden [ Fri Dec 14, 2007 6:27 am ] |
| Post subject: | |
I know, I know! I can't have my cake and eat it too.... I would like to vote for more than one... Set-up, first guitar, bracing, repair, woods, voicing... the list goes on. If I had to choose one, it would be voicing. Hesh, Great poll. Thanks! |
|
| Author: | Sam Price [ Fri Dec 14, 2007 6:37 am ] |
| Post subject: | |
Oh boy...for me it was the flying butresses that free the upper bout for tone and the adjustable neck that did it for me. I've spent ages studying and trying out these methods as well as studying bracing design. |
|
| Author: | blindreality [ Fri Dec 14, 2007 6:45 am ] |
| Post subject: | |
Jigs jigs jigs jigs... well and everything else. |
|
| Author: | Jody [ Fri Dec 14, 2007 11:48 am ] |
| Post subject: | |
for me its " guitar making " LOL since I still need to learn about everything .... !! actualy I think the biggest mystery so far ( hence my vote ), which seems even difficult for the most astute experts to define is structure and tonal qualities. Jody |
|
| Author: | Jody [ Fri Dec 14, 2007 11:54 am ] |
| Post subject: | |
set- up would also be right there at the top.... jody |
|
| Author: | FishtownMike [ Fri Dec 14, 2007 12:00 pm ] |
| Post subject: | |
I voted for jigs but I wouldn't mind seeing some stuff on the double tops and sides. I have read some stuff on this but there is not a lot out there on this new style. I find it very inetresting and would like to learn a little more on it. |
|
| Author: | David R White [ Sat Dec 15, 2007 2:03 am ] |
| Post subject: | |
Set Up! |
|
| Author: | DannyV [ Sat Dec 15, 2007 1:05 pm ] |
| Post subject: | |
I know what I don't want to see more of..........NO MORE CNC VERSES HAND CARVED and other related topics that result in a lot of bickering. Have a Great Festive Season, oh and party at my place next Friday if you're in Powell River. Guaranteed good time. |
|
| Author: | robertD [ Sun Dec 16, 2007 12:42 am ] |
| Post subject: | |
Great idea Hesh! Actually, there were three total I would have liked to vote for. However, since I can only do one, I have to choose repair. I want to get my repair business up and running this year. The other two, would have been, Lutherie as a business, and Tools and Jigs. |
|
| Author: | Peter J [ Sun Dec 16, 2007 3:18 am ] |
| Post subject: | |
Since I've only been building Classicals and Flamencos.... not Flemencos (must be Flemish from Finland...  ) and I'm about to embark on my first SS builds, I'd like to see a fairly comprehensive tutorial on the best methods to plan and install a truss-rod; from routing to assuring that it doesn't rattle. I know that it sounds pretty basic but since I've not done it before, I'd like to benefit from those who have.
Regards, Peter |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|