Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Walnut/sitka guitar shaped mandola
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=15064		 Page 1 of 1
Author:  martinedwards [ Thu Dec 20, 2007 6:12 am ]
Post subject: 
Built this to match a guy's guitar. same woods and as near the same shape as I could manage......

Walnut neck, back & sides
sitka top
maple binding & veneer under fretboard
Macassar ebony fretboard & bridge
Bone nut, saddle & pins
MOP dots
Gotoh tuners
Maple & walnut segnmented rosette









Action is pleasingly low

client wanted a 16" scale and untra light strings, but to my mind a shorter scale merits hevier...... I'd perfer to bung a set of 13s on there, but he wants 10s..... ah well, the customer is alwa.... no, the customer is NOT always right, but it's not often you can win an argument with a customer!!

soundclick
Author:  martinedwards [ Thu Dec 20, 2007 6:14 am ]
Post subject: 
and yes I know the pic of the back was before the tuners were fitted!!!!
Author:  Dave White [ Thu Dec 20, 2007 6:32 am ]
Post subject: 
Martin,

Very nice - sounds good too!!
Author:  Hesh [ Thu Dec 20, 2007 6:39 am ]
Post subject: 
Great job Martin and a very nice sounding instrument as well!!!
Author:  WaddyThomson [ Thu Dec 20, 2007 7:11 am ]
Post subject: 
Huzzah! Martin, that one looks and sounds great.  Nice job.
Author:  Wade Sylvester [ Thu Dec 20, 2007 9:02 am ]
Post subject: 
I love it Martin!

Did you put a truss rod in the neck?

Wade
Author:  LuthierSupplier [ Thu Dec 20, 2007 11:31 am ]
Post subject: 
Awesome job, I love it! Great playing too.
Tracy
Author:  martinedwards [ Fri Dec 21, 2007 1:32 am ]
Post subject: 
Don't tell lies about the playing Tracy, Santa wont bring you any pressies!!!

And Yes Wade there's a double acting truss rod in there, accesable from the head. got it from Sam in Taiwan on Ebay for pennies.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/