that is Buffy the wonder dog
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Osage Orange sound clip http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=15085 |
Page 1 of 1 |
| Author: | KenH [ Fri Dec 21, 2007 12:48 pm ] |
| Post subject: | |
I know there has been alot of interest in the Osage Orange guitar that I built, so I recorded a little sound clip of it. You can listen to it by clicking HERE I recorded this using a kodak easy share camera, so the sound quality might not be that great, but you can get an idea of the tone and volume this thing kicks out. |
|
| Author: | Hesh [ Fri Dec 21, 2007 12:52 pm ] |
| Post subject: | |
Ken she sounds great, very clear an rich. Nice job my friend!!! What's your dog's name? |
|
| Author: | KenH [ Fri Dec 21, 2007 12:59 pm ] |
| Post subject: | |
that is Buffy the wonder dog
|
|
| Author: | WaddyThomson [ Fri Dec 21, 2007 1:16 pm ] |
| Post subject: | |
Ken, that is really outstanding! You aren't from the South, are you? I don't know why I would think that. 
|
|
| Author: | Tim McKnight [ Fri Dec 21, 2007 1:33 pm ] |
| Post subject: | |
Great sounding guitar Ken. I really like Osage and wish more of the guitar buying public would appreicate this wonderful tonewood. I have have an Osage guitar on tour with Jake Owen's guitar player and he loves the tone of it. He said that it is a dream to record with as you have just demonstrated. |
|
| Author: | J.R. Hunter [ Fri Dec 21, 2007 4:24 pm ] |
| Post subject: | |
Ken, Very nice sound! Good chops too! How was the Osage Orange to work with? The stuff I've seen was very dense and heavy. The guy at the local mill here(who's got quite a bit of it) warned me that it's pretty hard on blades but that it's still one of his favorites. J.R. |
|
| Author: | KenH [ Fri Dec 21, 2007 4:32 pm ] |
| Post subject: | |
It resawed rather nicely, almost feeling like it had a wax in the wood. Sanding it was easy enough as the drum sander went right through it. I bent the sides at .070, and there were no problems at all bending it. I left the blanket on top of the wood and let the blanket heat the wood until I could feel strong heat through the wood on the other side. Then slowly screwed down the waist and slowly bent the lowr bout and then the upper bout slowly. Let it set under heat for 15 mins, then cool to room temp, then heated it again for 15 mins and let it cool overnight in the bender. There was a little springback, but nothing that was hard to deal with. This stuff is so dense that it begins to develop a shine just sanding the guitar. I didnt do any pore filling. The rosewood could have used it, but the osage didnt need any at all. I believe that I will make another one of these, a cutaway, to take to the newport-Miami show in April. |
|
| Author: | Sam Price [ Fri Dec 21, 2007 7:13 pm ] |
| Post subject: | |
Ken, Video clips are great! We need more.... Nice guitar, in looks and tone! |
|
| Author: | Dave White [ Fri Dec 21, 2007 11:20 pm ] |
| Post subject: | |
Ken. Lovely guitar nice sound and playing! It's greta being able to see and hear the instruments 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|