No reason to, no advantage.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Baking Braces? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=15163 |
Page 1 of 1 |
| Author: | j.Brown [ Fri Dec 28, 2007 5:31 pm ] |
| Post subject: | |
Has anyone baked their top braces to match the discussions on the baked tops? I know with the thicker pieces this may not work as well. -j. |
|
| Author: | grumpy [ Fri Dec 28, 2007 5:57 pm ] |
| Post subject: | |
No reason to, no advantage. |
|
| Author: | j.Brown [ Sat Dec 29, 2007 3:08 am ] |
| Post subject: | |
From what I was reading, I thought that a majority of the goal was to shrink the wood cells in the top and limit their range of expansion/contraction. I was just carrying that to the braces, thinking that baking the braces or super-drying them may decrease their capacity of movement as well. If its no benefit, though, it one more step I don't need to take. Just a thought I wanted to ask this forum, 'cuz there are some incredibly bright and intuitive people here. I can certainly see where baking out the resins in bracing would do no good at all. Thanks. -j. |
|
| Author: | j.Brown [ Sat Dec 29, 2007 3:09 am ] |
| Post subject: | |
"I can certainly see where baking out the resins in bracing would do no good at all." ...for the purposes of finishing the guitar that is. |
|
| Author: | grumpy [ Sat Dec 29, 2007 5:42 am ] |
| Post subject: | |
It's not about baking resins or other things.... How many times must it be spelled out? Go back and read the old threads, and only read what I say this time through.... bah... . |
|
| Author: | grumpy [ Sat Dec 29, 2007 7:31 am ] |
| Post subject: | |
Its' not because you baked the resins.... |
|
| Author: | BlackHeart [ Sat Dec 29, 2007 12:00 pm ] |
| Post subject: | |
I was just thinking about baking bracing also. Baking sounds like its a kind of kiln drying. And kiln drying is supposed to be not as good as air dryed. Gotta find that old post.. |
|
| Author: | grumpy [ Sat Dec 29, 2007 12:19 pm ] |
| Post subject: | |
Baking isn't kilning.... |
|
| Author: | J.R. Hunter [ Sat Dec 29, 2007 1:34 pm ] |
| Post subject: | |
I've already put on a few pounds over the holidays. I'm tryin' to watch it here and you guys aren't helping with all this talk of baking. |
|
| Author: | Brock Poling [ Mon Dec 31, 2007 5:47 am ] |
| Post subject: | |
[QUOTE=j.Brown] From what I was reading, I thought that a majority of the goal was to shrink the wood cells in the top and limit their range of expansion/contraction. I was just carrying that to the braces, thinking that baking the braces or super-drying them may decrease their capacity of movement as well. If its no benefit, though, it one more step I don't need to take.[/QUOTE] Yes, that is right. I think the "thing" about the top is it is bound at the edges so wood movement will have more of a disasterous impact on the guitar as it expands and contracts severely. This is an step to prevent cracking in extreme climates. The tone improvement (if there is one) seems to be a nice by product. The braces seem less inclined to cause a problem if they move a little with the natural humidity changes. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
