| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Oxford 9000 Question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1575 |
Page 1 of 1 |
| Author: | JJ Donohue [ Mon Apr 04, 2005 5:55 pm ] |
| Post subject: | |
For those few who have used this , what material would you suggest using to remove the finish at the bridge and FB extension? TIA |
|
| Author: | Michael Dale Payne [ Tue Apr 05, 2005 4:01 am ] |
| Post subject: | |
Scribe. scrape and sand. I would never use a chemical remover because of creep, contamination and possible staining and may even weaken the top if it infiltrats the top. |
|
| Author: | Bobc [ Tue Apr 05, 2005 4:04 am ] |
| Post subject: | |
JJ I turn a hook on a single edge razor blade. Makes a nice littl cabinet scraper. You can even grind away on both side to make it narrower. Works great. |
|
| Author: | Michael Dale Payne [ Tue Apr 05, 2005 4:14 am ] |
| Post subject: | |
Like the Zootmans said!! I use a box knife razor blade and a single edge shaving razor blade. the box knife razor blade is too stiff to bend, but I find it nice for getting right up aganst the scribe line and corners. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|