| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| performax sanders http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1579 |
Page 1 of 1 |
| Author: | bob J [ Tue Apr 05, 2005 12:04 am ] |
| Post subject: | |
I hace read much here about the 22/44. Why can't you use a 10/20 and thin one after another to same thickness and then join backs and tops? AM I missing something? |
|
| Author: | Brock Poling [ Tue Apr 05, 2005 12:49 am ] |
| Post subject: | |
you can. but joining the tops at final thickness is a lot harder -- you have to get the edges to line up perfectly. And. if you are flexing your top to feel for final thickness (rathering than measuring for a specfic target thickness) I am not sure doing one side at a time will give you an idea of how flexible the glued up plate will be. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|