Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Huon Pine
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=16310
Page 1 of 1

Author:  Daniel M [ Sat Mar 08, 2008 4:56 pm ]
Post subject:  Huon Pine

A friend of mine just returned from a trip to Australia & Tasmania & brought back some lovely wood, including some rare Huon Pine. I'm wondering if any of you have used this wood for soundboards.
The tops she showed me have a beautiful bearclaw figure. The tap tone is glassy & clear & the wood feels harder that hard Euro spruce. (thumbnail test) Grain count is in the high fifties, right across the board. Amazing wood!

Author:  Alan Carruth [ Sat Mar 08, 2008 6:11 pm ]
Post subject:  Re: Huon Pine

If I had that, I'd run a couple of tests to find the density, damping, and the Young's modulus along and across the grain. Then it would be easy to compare it with 'the usual suspects' in a meaningful way.

Author:  Rick Turner [ Sat Mar 08, 2008 8:26 pm ]
Post subject:  Re: Huon Pine

Huon is pretty nice stuff, but the real deal there is to try to find some of the ultra-rare King Billy pine. I checked out a number of samples of both when I was over in Tasmania last month, and the stuff that seemed to really have "it" with regard to tap tone was the King Billy. The Huon was a bit deader.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/