| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| 0.3mm Veneer http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=1665 |
Page 1 of 1 |
| Author: | jfrench [ Tue Apr 12, 2005 2:18 pm ] |
| Post subject: | |
Does anyone have a good source for veneer at a thickness of .03? This is about half the thickness of the veneers I get from constantines, and I'm getting sick of scraping them down in a jig for various inlays... Thanks! |
|
| Author: | HankMauel [ Wed Apr 13, 2005 1:39 am ] |
| Post subject: | |
LMI has an assortment of both 0.6 and 0.3mm colored veneers. |
|
| Author: | jfrench [ Wed Apr 13, 2005 4:18 am ] |
| Post subject: | |
Sorry, I should have been a bit mroe specific. I'm looking for undyed veneers of that thickness. Anyone know if their "white" veneer is maple, or something bleached, or something else all together? |
|
| Author: | CarltonM [ Wed Apr 13, 2005 6:27 am ] |
| Post subject: | |
LMI says it's natural maple. Carlton |
|
| Author: | D.L.Huskey [ Wed Apr 13, 2005 8:40 pm ] |
| Post subject: | |
jfrench, You might try , Certainly Wood. |
|
| Author: | bob J [ Thu Apr 14, 2005 6:49 am ] |
| Post subject: | |
Try www.wood-veneers.com in Denver. They produce veneers in various thicknes' and the inventory will pop your eyes out. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|