Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Dons Deals. BRW IN HERE> NO REASONABLE OFFER REFUSED.
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=17252		 Page 1 of 1
Author:  sharp_custom [ Mon May 19, 2008 8:48 am ]
Post subject:  Dons Deals. BRW IN HERE> NO REASONABLE OFFER REFUSED.
Stayed Tuned!
Author:  sharp_custom [ Mon Jun 02, 2008 7:33 am ]
Post subject:  Re: Don Deals.
Hold on. Experiencing technical difficulties.
Author:  sharp_custom [ Mon Jun 02, 2008 8:48 am ]
Post subject:  Re: Don Deals.
Want Brazilian Rosewood? Here's a few pieces from my wood pile. Will not ship any of these outside of the USA.

Image

G1S2: Back: 21-9/16” x 7-5/8” to 5-3/8” x 0.150”
Sides: 33-1/2” x 4 5/8” x 0.140”
Price: $500.00

IMG]http://i293.photobucket.com/albums/mm79/dsharp621/Swapmeet2008/G1S3.jpg[/IMG]

G1S3: Back: 21-9/16” x 7-5/8” to 5-5/16” x 0.155”
Sides: 33-1/2” x 4-13/16 x 0.160”
Price: $500.00

Image

G1S5: Back: 21-1/2” x 7-9/16” to 5-1/2” x 0.160”
Sides: 33-1/2” x 5” x 0.150”
Price: $500.00

Image

G2S6: Back: 21-5/8” x 7-13/16” x 0.160”
Sides: 33-1/2” x 4-7/8” x 0.152”
Price: $500.00

Image

G3S4: Back: 21-5/8” x 7-9/16” x 0.145”
Sides: 33-3/8” x 5” x 0.150”
Price: $500.00
Comments: Slight surface checking.

Image

G4S3: Back: 21-1/2” x 8-1/8” x 0.167”
Sides: 33-1/2” x 4-3/4” to 4-1/8” x 0.160”
Price: $500.00

Image

G5S2: Back: 21-1/2” x 7-7/8” x 0.150”
Sides: 33-1/2” x 4-7/8” to 3-9/16” x 0.145”
Price: $500.00

Image

G5S3: Back: 21-1/2” x 8-3/16” x 0.160”
Sides: 33-1/2” x 5” to 3-7/8” x 0.155”
Price: $500.00

Image

Image

G5S6: Back: 21-1/2” x 7-3/4” x 0.150”
Sides: 33-1/2” x 5” to 4” x 0.150”
Price: $500.00
Comments: Classical or smaller due to void.

Image

G6S5: Back: 21-1/2” x 8” x 0.155”
Sides: 33-1/8” x 4-3/4” to 4-1/8” x 0.145”
Price: $500.00

Image

G6S8: Back: 21-3/16” x 7-3/4” to 6-7/8” x 0.165”
Sides: 33-1/2” x 4-5/8” to 4-3/8” x 0.145”
Price: $500.00

Image

G6S9: Back: 20-3/4” x 7-3/4” x 0.170”
Sides: 33-1/2” x 4-1/2” to 3-7/16” x 0.130”
Price: $500.00
Author:  sharp_custom [ Mon Jun 02, 2008 9:12 am ]
Post subject:  Re: Don Deals.
Here's some unfinished projects I will never finish. I hope someone can use these.

Image

Description: Padauk J-17 (17" Jumbo) Back and Rim set. Sides are paudauk. Back is 3-piece Padauk and figured maple with Martin 45-style marquetry strips. Neck block is LMI style Mortise and tenon. Tail block is pattern grade ply. Sides are profiled. Price: SOLD Ken

Image

Image
Back Close Up

Image
Side Close UP

Description: Figured Birdseye maple Dreadnought Back and Rim Set. Neck and tail blocks are Martin Style Mahogany. Neck Joint is Mortise and tenon. Price: SOLD Ken

Image

Image

Description: Medium Figure Koa OM Cutaway Back and Rim Set. Back has a Martin 45-style strip inlaid. Neck block is LMI style Mortise and tenon. Tail block is pattern grade ply. Sides are profiled. Has a stabilized feather crack in cutaway. Price: SOLD Steve

Image

Image

Description: Description: Medium Figure Koa OM Cutaway Back and Rim Set. Back has a Martin 45-style strip inlaid. Neck block is LMI style Mortise and tenon. Tail block is pattern grade ply. Sides are profiled. Has a stabilized Crack in waist (Most of it will get routed off when binding). Price: $175.00.
Author:  Don Williams [ Tue Jun 03, 2008 8:46 am ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
I sure wish I had some money....I love that Set G659.
Flatsawn Brazilian can be gorgeous...fortunately, I have some very similar wood in my pile. So similar, in fact that I would sware they were from the same tree from flitched boards.
Author:  sdsollod [ Tue Jun 03, 2008 1:24 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
Hey Don,
I was looking at the koa OM cutaway back and rim set with the feather crack in the cutaway... I noticed what looks like CA stain in the photo. I guess that is where the crack is... I suppose that this area would clean up okay with sanding, right? ...and the crack should be a non-issue? Would you consider $150? :oops:
Author:  KenH [ Tue Jun 03, 2008 1:42 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
would you take $225 for both the paduk and the birdseye maple sets?
Author:  sharp_custom [ Tue Jun 03, 2008 3:46 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
sdsollod wrote:
Hey Don,
I was looking at the koa OM cutaway back and rim set with the feather crack in the cutaway... I noticed what looks like CA stain in the photo. I guess that is where the crack is... I suppose that this area would clean up okay with sanding, right? ...and the crack should be a non-issue? Would you consider $150? :oops:



HI Steve. the crack is stabilized with CA. Sanding should take care of it. If you're interested, I'll accept your offer. Thanks, Don.
Author:  sharp_custom [ Tue Jun 03, 2008 3:47 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
Hodges_Guitars wrote:
would you take $225 for both the paduk and the birdseye maple sets?



Hi Ken: Sounds good!! Thanks, Don
Author:  KThomas [ Tue Jun 03, 2008 4:35 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
Hi Don,

First time I have done this, would you go $800.00 for G1s2 and G6s9?

Thanks,
Kurt
Author:  sdsollod [ Tue Jun 03, 2008 4:44 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
HI Steve. the crack is stabilized with CA. Sanding should take care of it. If you're interested, I'll accept your offer. Thanks, Don.

Thanks Don, I'll take it.
Author:  sharp_custom [ Tue Jun 03, 2008 6:30 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
KThomas wrote:
Hi Don,

First time I have done this, would you go $800.00 for G1s2 and G6s9?

Thanks,
Kurt



Hi Kurt:

They're yours if you want them.

Thanks, Don
Author:  KThomas [ Tue Jun 03, 2008 6:55 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
Don,

Thanks, sure do, just let me know what I need to do to pay. One day, I hope to make a killer guitar out of them, if not, there's always Swapalooza 2010 laughing6-hehe
Author:  sharp_custom [ Tue Jun 03, 2008 7:41 pm ]
Post subject:  Re: Don Deals. BRW IN HERE>>> MAKE ME AN OFFER>>>IT ALL HAS TO
Thanks all. Please PM your paypal and shipping info. I'll send you an invoice. Thanks, Don
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/