Lance Kragenbrink wrote:
Post your wants and needs here!
Please do not start a new thread.
Thanks!
Please do not start a new thread.
Thanks!
I need a lover that won't drive me cra-a-zy! (Sorry, couldn't resist!)
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| ::WANTED:: Post your wants and needs here! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=17448 |
Page 1 of 2 |
| Author: | LanceK [ Mon Jun 02, 2008 9:23 am ] |
| Post subject: | ::WANTED:: Post your wants and needs here! |
Post your wants and needs here! Please do not start a new thread. Thanks! |
|
| Author: | L. Presnall [ Mon Jun 02, 2008 9:34 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Lance Kragenbrink wrote: Post your wants and needs here! Please do not start a new thread. Thanks! I need a lover that won't drive me cra-a-zy! (Sorry, couldn't resist!)
|
|
| Author: | Bob Long [ Mon Jun 02, 2008 9:40 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I need ( and I mean really need!) a Stewmac Optivisor. long |
|
| Author: | Sanford Stanton [ Mon Jun 02, 2008 10:07 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I would like to by "purfling" BW, BWB, B, etc. Thanks, Standin aka Sanford Stanton ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Paul Burner [ Mon Jun 02, 2008 11:19 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I need some cam clamps (just not the 12" huge ones I saw) |
|
| Author: | peterm [ Mon Jun 02, 2008 11:57 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Need high curl Koa and Maple bindings. Thanks |
|
| Author: | peterm [ Mon Jun 02, 2008 12:51 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I also would like to buy a few sets of IE Rosewood.
|
|
| Author: | Hesh [ Mon Jun 02, 2008 1:27 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I am looking for some of the same things that my buddy Brock is looking for: BRW orphan sides or pieces of any size big enough to make or book-match to make rosettes BRW bridge blanks, the larger the better And..... I would also be interested in Mad Rose as above too. Thanks! |
|
| Author: | Glenn LaSalle [ Mon Jun 02, 2008 1:34 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Seems BRW is in demand  I am also looking for some BRW bindings. Also Mad RW bridge blanks and fingerboards. I have a couple nice BRW fingerboards and a ~8 BRW bridge blanks - I need binding to match up with these.Glenn |
|
| Author: | KenH [ Mon Jun 02, 2008 2:42 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I am looking for inexpensive, straight grained and quarter sawn honduran Mahogany B&S sets also quarter sawn EIR B&S sets |
|
| Author: | fryovanni [ Mon Jun 02, 2008 3:23 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I have a couple oversized mad rose bridge blanks in the upper left corner of this pic if this is what you guys are looking for(3"+x11").  I will look though some of my shelves and maybe slice up some mad rose tonight(not sure how I wanted to cut it yet(back/side sets), but I am sure there is plenty of "extra" pieces that will be available after the set stock is cut. I will add it to my table as soon as I can. I will also dig back through my curly Koa and see if I can round up another handful. |
|
| Author: | Blain [ Mon Jun 02, 2008 4:05 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I would like BRW Fingerboard & Bridge blanks. Not going to hold my breath, but if anyone does have some to offer, let me know. Thanks, Blain |
|
| Author: | James Ringelspaugh [ Mon Jun 02, 2008 5:32 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I'm looking for a Cochran plunge base |
|
| Author: | Jim Kirby [ Mon Jun 02, 2008 5:35 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
BRW bridge blanks ebony fingerboards (classical width) spanish cedar neck blanks (1" by 3" for scarf joint heads) How's that for utilitarian? JK |
|
| Author: | CraigL [ Mon Jun 02, 2008 5:37 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Curly maple and some sycamore. If the maple could have a fairly tight consistent pattern, and if the sycamore was darker with a good ray figure, that would be great. Any mother of pearl and abalone blanks would also be cool. |
|
| Author: | CraigL [ Mon Jun 02, 2008 5:40 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Neck blanks from walnut, cherry or other domestic woods. |
|
| Author: | Tim McKnight [ Mon Jun 02, 2008 7:59 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I am looking for Australian Queensland Maple sets. |
|
| Author: | peterm [ Mon Jun 02, 2008 10:59 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Looking for snakewood fretboards and bridge blanks. Thanks a lot! |
|
| Author: | RobE [ Tue Jun 03, 2008 12:01 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I'm looking for tools. Planes (#5 or #04) Honing Guide Chisels Bending Forms/Molds Plans ...or anything else that I young luthier needs to fully tool up. I am also looking for any cheap b+s sets (cheap orphaned sides too, to practice side bending on), or cheap tops. Really, anything that is a good value. |
|
| Author: | Richard Wilson [ Tue Jun 03, 2008 7:50 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Anyone has any of the following they no longer need/use let me know: I'm after a vacuum clamp -- the kind with which you can tilt/rotate the workpiece. Also possibly interested in any drill press rosette cutters (LMI / luthiertool.com style). |
|
| Author: | Marc Lupien [ Tue Jun 03, 2008 8:00 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I generally do bookmatched fretboards. I'd like to find some figured wood that could be split and bookmatched to do striking fretboards. Any 1.5 by 3/4 by 20 inches nice figured wood left over from resawing figured B/S sets could be interesting... Thank's Marc |
|
| Author: | Arnt Rian [ Tue Jun 03, 2008 8:05 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Fingerboards and bridge blanks; ebony and BRW 'lookalikes' (that can be shipped internationally...) |
|
| Author: | Frank Aarre [ Tue Jun 03, 2008 8:33 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
Maple neck blank allround size plane(4,4 1/2or5) chisels fretsaw(handsaw .024 kerf) |
|
| Author: | Dave-SKG [ Tue Jun 03, 2008 10:11 am ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I would like any BRW orphaned or thinned sides, backs, fingerboards and bridge blanks. |
|
| Author: | Terry Stowell [ Tue Jun 03, 2008 5:03 pm ] |
| Post subject: | Re: ::WANTED:: Post your wants and needs here! |
I need headplate material for this myrtle set from Peter, Prefer to have some darker content like the "flames" up top. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|