| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| My new lable http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=2089 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Fri Jun 03, 2005 5:07 am ] |
| Post subject: | |
|
|
| Author: | Bobc [ Fri Jun 03, 2005 5:25 am ] |
| Post subject: | |
Hey Michael it looks beauuuuuuutiful. |
|
| Author: | LanceK [ Fri Jun 03, 2005 5:30 am ] |
| Post subject: | |
Ok- now who took the picture? 
Great looking lable! |
|
| Author: | Michael Dale Payne [ Fri Jun 03, 2005 5:32 am ] |
| Post subject: | |
Diane about two years ago |
|
| Author: | Brock Poling [ Fri Jun 03, 2005 5:46 am ] |
| Post subject: | |
What are you doing, striking the other end of that chisel with a mallet?
|
|
| Author: | Jeff Doty [ Fri Jun 03, 2005 5:48 am ] |
| Post subject: | |
Michael, Very classy looking label. What kind of paper are you printing it on? Oh, and what glue do you use? Just curious. Jeff |
|
| Author: | Michael Dale Payne [ Fri Jun 03, 2005 6:07 am ] |
| Post subject: | |
[QUOTE=Brock Poling] What are you doing, striking the other end of that chisel with a mallet? [/QUOTE]
No. pushing with my hand Look close |
|
| Author: | Michael Dale Payne [ Fri Jun 03, 2005 6:17 am ] |
| Post subject: | |
[QUOTE=Jeff Doty] Michael, Very classy looking label. What kind of paper are you printing it on? Oh, and what glue do you use? Just curious. Jeff[/QUOTE] 8# rice paper is what I have been using but I think I may have to change to a parchment due to the large amount of color ink. Adhesive has been shellac but I have not tested yet with the color ink. In the past I have sprayed the front with a very light coat of shellac, allowed it to dry 24 hrs, then sprayed the back of the label and attached it to the guitar. I hope to do the same but have to test first. If I have run problems I will use 3m spray fixitive to lock the image and attach with 3m spray adhesive. |
|
| Author: | Tim McKnight [ Fri Jun 03, 2005 1:07 pm ] |
| Post subject: | |
Michael: That label is awesome! |
|
| Author: | RCoates [ Fri Jun 03, 2005 2:19 pm ] |
| Post subject: | |
Sweet! |
|
| Author: | Drew [ Sat Jun 04, 2005 4:56 am ] |
| Post subject: | |
Really nice label! But I'd leave off the "Signature:__________". It's superfluous. Your signature speaks for itself and doesn't need to be announced. |
|
| Author: | Colby Horton [ Sun Jun 05, 2005 12:48 am ] |
| Post subject: | |
How did you do the abalone pearl logo in the middle? |
|
| Author: | arvey [ Sun Jun 05, 2005 1:57 am ] |
| Post subject: | |
Very Nice, Much nicer than mine. I also wonder how you did the logo in the centre but have to admit that that is the only thing I don't really like on it. I like the more subtle asprect of the rest of the label. As far as sticking it in I have had great success using Hide glue to glue them in and then painting hide glue over top to seal them. Works for me. |
|
| Author: | Michael Dale Payne [ Mon Jun 06, 2005 12:06 am ] |
| Post subject: | |
[QUOTE=Colby Horton] How did you do the abalone pearl logo in the middle? [/QUOTE] The whole label is a 3d rendered object with materials defined and attached. The base of the label uses a label just as I did for Lance as it's material. The logo is made of four 3d objects. One with MOP as the material and three with Paua as the material. The material is like a skin that is mapped from a photo of the specified material then assigned to a 3d object. Then an image is rendered and converted to a graphic format to give me the printable out-put |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|