Anybody have a couple of oversized nut blanks they could part with?, My 1/4" stock is a smidgen to narrow, guess I got carried away with truing up the nut slot.
I really REALLY dont want to go to the pet store!
Thanks - LMK
LK
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Need a couple of oversized nut blanks http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=2253 |
Page 1 of 1 |
| Author: | LanceK [ Tue Jun 21, 2005 4:10 am ] |
| Post subject: | |
Anybody have a couple of oversized nut blanks they could part with?, My 1/4" stock is a smidgen to narrow, guess I got carried away with truing up the nut slot. I really REALLY dont want to go to the pet store!
Thanks - LMK LK |
|
| Author: | Pwoolson [ Tue Jun 21, 2005 4:12 am ] |
| Post subject: | |
Lance, I've laminated them in the past with great results. You might give it a try to see if your line disapears like mine did. |
|
| Author: | crazymanmichael [ Tue Jun 21, 2005 4:24 am ] |
| Post subject: | |
i have some unbleached if they will do? |
|
| Author: | Jimmie D [ Tue Jun 21, 2005 5:58 am ] |
| Post subject: | |
Lance, I have some roughed out to about 5/16". I can send you enough for a couple if that will help. |
|
| Author: | Mike Mahar [ Tue Jun 21, 2005 6:30 am ] |
| Post subject: | |
Too bad you didn't know you needed these when you were at ASIA. There was a table right next to Rivolta that was selling nut and saddle blanks and they were very oversized. I bought three. I could send you one but I need the other two. (My nut slots are a bit thick too) Contact me. |
|
| Author: | LanceK [ Tue Jun 21, 2005 9:20 am ] |
| Post subject: | |
Mike, I look at them , but it didn't strike me to grab a few, your talking about fossil ivory king right? I am all set now though, thanks for offering, all of you thanks -- |
|
| Author: | Jimmie D [ Tue Jun 21, 2005 11:12 pm ] |
| Post subject: | |
Lance, Your nuts,errr..., bones,errr..., little white guitar thingy's are in the mail. |
|
| Author: | L. Presnall [ Thu Jun 23, 2005 8:08 am ] |
| Post subject: | |
Jimmie, Larry in C'ville here...say, do you still want to sell a few nut/saddle blanks? I thought I had enough but I made a mistake (or 2)...I could order them, but I don't want to wait a week! PM or email me if you have any to spare and I'll work a deal with you. Thanks. |
|
| Author: | crazymanmichael [ Thu Jun 23, 2005 8:10 am ] |
| Post subject: | |
larry if jimmie can't help i have unbleached bone i can send you. |
|
| Author: | Jimmie D [ Thu Jun 23, 2005 9:15 am ] |
| Post subject: | |
Hi Larry, I thought I had more than i did.If I can get some more cut this weekend, I'll give you a shout. |
|
| Author: | L. Presnall [ Fri Jun 24, 2005 7:44 am ] |
| Post subject: | |
Hey guys, thanks for the offers...I broke down and ordered stuff from SM this morning...funny, but I went after 7 nut and 7 saddle blanks...ended up browsing and spending $150  ...THAT'S why I stay out of the catalogs as much as I can!
Larry |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|