I use the Stew-Mac compounds starting with med. then fine, and sometimes swirl remover to finish. I'm using a random-orbital sander with a buffing pad attached until I get my pedestal buffer. But I do get a surprisingly nice finish this way.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Buffing wheel compounds http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=2259 |
Page 1 of 1 |
| Author: | Daryl [ Wed Jun 22, 2005 1:34 am ] |
| Post subject: | |
For those of you using the buffing wheels; would you recomend the Menzerna coumpounds from Stew Mac, if so what grits? Thanks |
|
| Author: | LanceK [ Wed Jun 22, 2005 1:36 am ] |
| Post subject: | |
Yes, they work great, there a tad cheaper at Grizzly. Ill try to dig up the correct part numbers for ya. |
|
| Author: | Josh H [ Wed Jun 22, 2005 3:05 am ] |
| Post subject: | |
I use the Medium and then the fine to finish it off. The yave worked well for me. I believe there is one grit that is even finer. But I haven't tried it. Josh |
|
| Author: | John How [ Wed Jun 22, 2005 3:09 am ] |
| Post subject: | |
Here is what I just ordered from Grizzly and it seems like these prices are quite a bit cheaper than the other place. H0811 Menzerna Brown - Tripoli Prepolish Compound 14.95 H0813 Menzerna Yellow - Fine Polishing Compound 18.95 H0815 Menzerna Tan - Very Fine High-Gloss Compound 18.95 Grizzly Smeone here on the forum was just selling some of these compounds just yesterday |
|
| Author: | Daryl [ Wed Jun 22, 2005 3:43 am ] |
| Post subject: | |
Thanks, it's appreciated. Great forum. I'll see if Grizzly ships to Canada. If some one on the forum was selling coumpounds, give me a shout |
|
| Author: | Dave Anderson [ Tue Jun 28, 2005 6:08 am ] |
| Post subject: | |
I use the Stew-Mac compounds starting with med. then fine, and sometimes swirl remover to finish. I'm using a random-orbital sander with a buffing pad attached until I get my pedestal buffer. But I do get a surprisingly nice finish this way.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|