| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| filing small defects prior to finishing http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=2440 |
Page 1 of 1 |
| Author: | Andy Zimmerman [ Tue Jul 12, 2005 2:01 am ] |
| Post subject: | |
Hi What do all of you use to fill small nicks/dings/gaps etc prior to finishing. Do you use superglue, and if you do, do you use the thin stuff or something thicker. Also, do you use some kind of vinyl sealer etc prior to the superglue to protect staining the top? Andy |
|
| Author: | Michael Dale Payne [ Tue Jul 12, 2005 2:08 am ] |
| Post subject: | |
I swell small dings with water and re-prep sand tops and softer hard woods. I avoid at all cost major dings in tops  If I have a ding that will not swell I use either med CA or Zpoxy, just proud of level. scrape level with burnished razor blade after cure and light sand. I use 2# wax free shellac sanding sealer prior to finish application.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|