| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| First come first serve! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=2767 |
Page 1 of 1 |
| Author: | LanceK [ Tue Aug 09, 2005 5:21 am ] |
| Post subject: | |
I have 28 pieces of paua abalam that range from .056 wide to .075 wide, these are off cuts that I made while setting up my jig. There all 5.5" long, and match stewmacs cruved strips in color perfectly. If your interested email me for a price. lance@kragenbrinkguitars.com Thanks 
 |
|
| Author: | Don A [ Tue Aug 09, 2005 11:49 am ] |
| Post subject: | |
Lance, you holding out on us  A new jig and you haven't posted it yet? Lets see what you were working on.
|
|
| Author: | LanceK [ Tue Aug 09, 2005 12:10 pm ] |
| Post subject: | |
Don, it still needs refining but here is the idea. The table that the shell is clamped to is on drawer slides and it moves the plate across the blade. I just loosen the wing nuts and bumb the shell to the fence, then run it across the blade. Then repeat 
|
|
| Author: | RussellR [ Tue Aug 09, 2005 12:17 pm ] |
| Post subject: | |
Cool Jig Lance, what sort of cutter are you using there ? |
|
| Author: | Don A [ Tue Aug 09, 2005 12:20 pm ] |
| Post subject: | |
Thanks Lance. Another jig to add to my already lengthy to do list. 
|
|
| Author: | LanceK [ Tue Aug 09, 2005 9:47 pm ] |
| Post subject: | |
This batch of paua is still availible - make an offer if interested
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|