Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Wood Search
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=2941		 Page 1 of 1
Author:  Sprockett [ Tue Aug 23, 2005 6:05 am ]
Post subject: 
Ok with all the specials flying around here it got a bit crazy and my wife took all the money and wouldn't talk to me till the ads stopped and I stopped panting , I'm looking for something very specific this time around....

I need to find a Classical set of Cocobolo with alot of figure in the back, I dug through the vendors here and most of the cocobolo I found was either sold or fairly plain. I'm building a hauser based classical and want something that will just absolutely POP. It needs to be well quartered as I'm going to build this one very very light...

Any takers??

Thanks

-Paul-



Author:  Don Williams [ Tue Aug 23, 2005 6:44 am ]
Post subject: 
I have some stuff that might be interesting....
go here.

It wouldn't be cheap, but it sho' is nice!
Just a little flatsawn on the outer half though, sorry.


Don Williams38587.6569560185
Author:  Sprockett [ Tue Aug 23, 2005 7:09 am ]
Post subject: 
Dang Don... that's some NICE work there... the figures a little larger than I wanted, I'm looking for the stuff that has lots of dark swirls in it...

Cheers

-Paul-
Author:  RussellR [ Tue Aug 23, 2005 7:33 am ]
Post subject: 
Paul

I have these couple of sets, but I'm in the UK so could work out quite expensive with the shipping etc.

but if you are interested I will try to work out something.






Russell
Author:  Brad Goodman [ Tue Aug 23, 2005 7:41 am ]
Post subject: 
Paul,
I have some Coco that might fit the bill ,but it is not wide enough for 2 piece backs-I think it is 6"wide so you could put cheeks on it,it is quartersawn so you would never be able to see the cheeks.
If you have any interest let me know and I will send you some pictures.
Thanks, Brad
Author:  Sprockett [ Tue Aug 23, 2005 8:23 am ]
Post subject: 
Russell that second picture is what I'm looking for, but your right shipping from the UK can be an issue. I've gotten a couple of emails of people who are looking, I'm being very picky this time because I have something VERY special in mind for this one. Russell if you want to talk money we can do that, I can pay with a CC so the conversion rate happens automatically and I'll happily pay the shipping..

Brad it has to be at least 7-1/4" wide which is standard for classicals, otherwise you'd be on. I'm not in a huge hurry but I figured it would be hard to find what I wanted so I'm looking now. I'll send you a message Brad about some other things I was going to get from you.

In the meantime I'm working on the shop, building some new jigs and putting things back together after the HB show. I have 3 planned right now and one special order I have to start planning on (he wants a 12 fret parlor).

Which reminds me.... does anyone know where I can get plans for an OO body shape??

Cheers

-Paul-
Author:  RussellR [ Tue Aug 23, 2005 8:30 am ]
Post subject: 
Paul

On the OO try John Hall, He often has Martin stuff and makes OO forms and Molds, so I guess he based those on a plan or something.


I'll PM you on the Coco

Russell

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/