| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Dust hoods and ports--need advice... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=3047 |
Page 1 of 1 |
| Author: | John Elshaw [ Tue Aug 30, 2005 12:21 pm ] |
| Post subject: | |
What are some of the methods you have all used to increase the size of your dust ports on your tools? Most of the standard dust ports are way too small to be effective. I found some components usually used for hvac applications, however I'm not sure if this will be best. I'd like to get a few other ideas before I start cutting 6" holes in all my tools. Also, how large are your dust hoods for tools like your drill press, mitre saw, etc? Thanks! John |
|
| Author: | John Elshaw [ Wed Aug 31, 2005 1:22 am ] |
| Post subject: | |
Thanks, I'm gonna see what Oneida's design service comes up with also. Once they give me an idea of what I'll need based on a 2 hp model, I'll be back looking for advice. Any pics you have would be appreciated. Cheers! John |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|