| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Acoustic Plans http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=3964 |
Page 1 of 1 |
| Author: | j.Brown [ Thu Dec 01, 2005 5:28 pm ] |
| Post subject: | |
I am in need of some Grand Auditorium Acoustic plans/blueprints. Can anyone suggest a source? Even a template and some rough dimensions would do me good and I'll "fill in the blanks" in AutoCAD. Any direction would be greatly appreciated. Thanks. -j. |
|
| Author: | Mattia Valente [ Thu Dec 01, 2005 9:41 pm ] |
| Post subject: | |
When I drew up my GA plans, I simply went to the Taylor website (their -14 body shapes are some of my fave sounding instruments), took the basic measurements, and drew until I had something that I liked. A head-on shot of the instrument should let you figure most of the measurements you need out from the ones you know. Bracing, I followed Cumpiano's instructions/plans, with a few modifications. |
|
| Author: | Josh H [ Fri Dec 02, 2005 12:24 am ] |
| Post subject: | |
If you want a physical template to work off of I know you can them from LMI. They have the Taylor GA and most other popular models. Like Mattia it is one of my favorite shapes and I based my GA model on their design. Josh |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|