| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Box fan sources... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4040 |
Page 1 of 1 |
| Author: | John Elshaw [ Thu Dec 08, 2005 1:22 pm ] |
| Post subject: | |
Does anybody have a good website or resource for buying a boxfan? I'd like to get a furnace type fan to build a downdraft table, and I can't seem to find a good resource with a lot of choices. Any help would be greatly appreciated. Cheers! John |
|
| Author: | Bobc [ Thu Dec 08, 2005 1:34 pm ] |
| Post subject: | |
John try looking here. http://www.pennstateind.com/store/dca.html |
|
| Author: | Shane Neifer [ Thu Dec 08, 2005 3:27 pm ] |
| Post subject: | |
John, Box fans, them big (20 inch or so by 20 inch by 6 inch) fans that I use to dry wood are availble from Wal-mart, cheap. Furnace fans (rat cages as they are know in these parts) can be found at furnace repair/replacement companies. In small communities like mine, the local dump has a seperate area where metal items are thrown and is a great source for washing machine motors, fans, lots of metal bits, springs, etc. Second stores are good also. For a downdraft table I would make sure that your design keeps dust away from the motor or ensure that it is designed for a dusty environment Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|