| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Porter Cable Speed-Bloc sanders http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4080 |
Page 1 of 1 |
| Author: | npalen [ Tue Dec 13, 2005 2:57 am ] |
| Post subject: | |
Speed-Bloc 330 Speed-Bloc 0330 My curiousity is getting the best of me. Anyone know the difference between the 330 and the 0330 besides about $20? Nelson |
|
| Author: | Michael McBroom [ Tue Dec 13, 2005 3:03 am ] |
| Post subject: | |
Maybe the 330's built in the US and the 0330's built in China? Best, Michael |
|
| Author: | npalen [ Tue Dec 13, 2005 6:03 am ] |
| Post subject: | |
Could be. |
|
| Author: | L. Presnall [ Thu Dec 15, 2005 1:50 am ] |
| Post subject: | |
Is the 330 a ROS? |
|
| Author: | npalen [ Thu Dec 15, 2005 5:46 am ] |
| Post subject: | |
I would say it's a fixed orbit since the pad doesn't rotate like round DA sanders. (Not sure if that's a valid statement, however) I believe they specify it as a 5/64" orbit dia. |
|
| Author: | Brad Goodman [ Thu Dec 15, 2005 5:53 am ] |
| Post subject: | |
I had one of these sanders for many years. I am very sensitive to vibration and found this sander irritated my nerves and joints much more than the random orbit sanders I now use-Festool. Also there is no provision for dust removal. |
|
| Author: | npalen [ Thu Dec 15, 2005 6:24 am ] |
| Post subject: | |
Brad--Hang the dust collector hose over your shoulder as Bob Benedetto does in his video. 
This does require 4" clothes dryer hose with a "hollow" Folger's coffee can duct taped on the end. (for ballast) Probably not OSHA approved, huh. Just kidding here, I'll bet Bob can afford about any kind of dust collector he wants. Nelson |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|