| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Help!! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4164 |
Page 1 of 1 |
| Author: | clavin [ Mon Dec 19, 2005 6:05 am ] |
| Post subject: | |
Hi everyone! I made a screw up just in time for the holidays! Now I need to learn how to fix it equally as timely. Any help here would be greatly appreciated! I normally don't do work on finished guitars for the following reasons, but the apron I had on an already finish guitar came loose during the sandout of an inlay, and the finish got lightly scuffed in a few places. I think it's 80 grit as well. The scuffs are whitish. How do I make them go AWAY??? Thanks! Craig Lavin 
|
|
| Author: | Evan Gluck [ Mon Dec 19, 2005 6:14 am ] |
| Post subject: | |
Craig can you send us a picture? There are alot of methods but I need to see the damage if possible. Evan@ New York Guitar Repair, PS we hung out a bit at ASIA |
|
| Author: | clavin [ Mon Dec 19, 2005 6:47 am ] |
| Post subject: | |
It's small as well. I used image-resizer to do it. Any thoughts? Craig |
|
| Author: | clavin [ Mon Dec 19, 2005 6:48 am ] |
| Post subject: | |
That was fun huh? All the music as well. Almost like the grateful dead re-born 
I'm working on the pic Craig |
|
| Author: | Evan Gluck [ Mon Dec 19, 2005 6:54 am ] |
| Post subject: | |
cool Craig, How is the baby? Anyway I really need to see it because I would be giving blind advice without a photo. |
|
| Author: | clavin [ Mon Dec 19, 2005 7:01 am ] |
| Post subject: | |
in an email.. Thanks clavin@handcraftinlay.com |
|
| Author: | Evan Gluck [ Mon Dec 19, 2005 7:05 am ] |
| Post subject: | |
Hey Craig,its evross68@yahoo.com |
|
| Author: | tippie53 [ Tue Dec 20, 2005 4:16 am ] |
| Post subject: | |
Is this lacquer or poly? john |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|