Thanks a million Sylvan. Your site has always been a great source of jigs and building tips. We novices really do appreciate it.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Double Tenon Neck Joint http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4226 |
Page 1 of 1 |
| Author: | Sylvan [ Sat Dec 24, 2005 5:48 am ] |
| Post subject: | |
Happy Holidays to all! I just posted on my web site a comprehensive article on how to create the double tenon neck joint. This joint bolts both the neck and fingerboard to the body. Obviously there is no glue involved. I included the length and size of bolts and other details that would allow anyone to try the joint on their next instrument. Go here. |
|
| Author: | Bobc [ Sat Dec 24, 2005 6:02 am ] |
| Post subject: | |
Thanks Sylvan. Very clear instructions and pictures. Much appreciated. Happy Holidays to you too. |
|
| Author: | Shane Neifer [ Sat Dec 24, 2005 6:05 am ] |
| Post subject: | |
Sylvan, Thanks for sharing this. It is printing as we speak! I have looked at this joint with interest. My concern for it's use has been the weighht it would add to the guitar. Did you notice much difference in weight or do you have anything impericle on that? Thanks again Shane |
|
| Author: | BlueSpirit [ Sat Dec 24, 2005 6:35 am ] |
| Post subject: | |
Great work. I'm going to give it a try. Thanks Sylvan. |
|
| Author: | Sylvan [ Sat Dec 24, 2005 6:40 am ] |
| Post subject: | |
Shane - The difference in weight is absolutely minimal. Most of the piece of wood that replaces the popcycle stick is routed away. And I use spruce for that piece which is very light anyway. The bolt and nuts add less than 10 grams. And, if you think about it, that 10 grams of weight is right at the center of the guitar where it won't be felt at all. |
|
| Author: | Shane Neifer [ Sat Dec 24, 2005 6:43 am ] |
| Post subject: | |
Thanks Sylvan, Merry Christmas! Shane |
|
| Author: | Dave-SKG [ Sat Dec 24, 2005 8:13 am ] |
| Post subject: | |
AS ALWAYS>>>ExCELLENT WORK MY FRIEND! Merry Christmas! |
|
| Author: | Don A [ Sat Dec 24, 2005 8:29 am ] |
| Post subject: | |
Thanks a million Sylvan. Your site has always been a great source of jigs and building tips. We novices really do appreciate it.
|
|
| Author: | Wade Sylvester [ Sat Dec 24, 2005 10:09 am ] |
| Post subject: | |
Thanks Sylvan, It sure takes the mystery out of it. Clear as a Bell! Wade |
|
| Author: | Dave Anderson [ Sat Dec 24, 2005 3:52 pm ] |
| Post subject: | |
Merry Christmas Sylvan and THANKS for the nice gift. I always thought that a glued on fretboard would be better but I just might try this. 
|
|
| Author: | Andy Zimmerman [ Sat Dec 24, 2005 4:02 pm ] |
| Post subject: | |
Merci Beaucoup!! Andy |
|
| Author: | Terry Stowell [ Sun Dec 25, 2005 10:00 am ] |
| Post subject: | |
Thanky, Sylvan 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|