| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| carbon fiber uses and source? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4252 |
Page 1 of 1 |
| Author: | harry [ Tue Dec 27, 2005 8:16 am ] |
| Post subject: | |
I've seen carbon fiber used in braces and just nowsaw a couple of posts about using it in necks (in the african mahogany neck thread). How is it used? And where do you get it? |
|
| Author: | Michael Dale Payne [ Tue Dec 27, 2005 8:27 am ] |
| Post subject: | |
It is used as stiffeners on both sides of the truss rod channel. You channel the fretboard edge of the neck to the dims of the CF rods. You can get it at many places Stew-Mac and LMI both sell it. |
|
| Author: | Tim McKnight [ Tue Dec 27, 2005 12:34 pm ] |
| Post subject: | |
Here is where I get mine: Carbon rods |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|