| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Micro tablesaw recommendations... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4364 |
Page 1 of 1 |
| Author: | John Elshaw [ Wed Jan 04, 2006 4:54 am ] |
| Post subject: | |
Does anybody have any good recommendations for a micro tablesaw? I'd like to get one to use for rosette tiles, veneers, and other small projects. Any recommendations would be greatly appreciated. Thanks! John |
|
| Author: | Terry Stowell [ Wed Jan 04, 2006 5:05 am ] |
| Post subject: | |
micro-mark.com has em-$344 for one model. |
|
| Author: | csullivan [ Wed Jan 04, 2006 5:13 am ] |
| Post subject: | |
Proxxon also makes one very similar (model FKS/E) to the Micro Mark and it's priced a couple of bucks less. I have one of their scroll saws that's very nice. They're German-made. They also have a cheaper saw (KS 115) for about $130. |
|
| Author: | Tom Dowey [ Wed Jan 04, 2006 5:14 am ] |
| Post subject: | |
You might want to check out preac.com I just know of them, not first hand, so can only point you to their site. They sell a mini table saw as well as a mini thickness sander, which some inlay artists use for thicknessing small parts. |
|
| Author: | Don A [ Wed Jan 04, 2006 5:28 pm ] |
| Post subject: | |
John, I bought a used Jarmac with a 4" blade and 9" x 12" table on eBay. I also bought a cheap tablesaw and disk sander package. Stay away from the package as the word cheap doesn't exclusively describe the price.  However, the Jarmac is well made hobby saw. Do a google search to see what they look like then try eBay.
|
|
| Author: | crowduck [ Thu Jan 05, 2006 10:56 am ] |
| Post subject: | |
Don't know if this one from Harbor Freight is 'good enough' for your task, but it's cheap at $50. http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnu mber=46379 I bought a used Dremel Mini 4" tablesaw off eBay for about $150. Dremel doesn't make them any more, but they sometimes appear on eBay. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|