Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Woolson Neck Tennon Jig Plans
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4403		 Page 1 of 1
Author:  LanceK [ Fri Jan 06, 2006 11:05 am ]
Post subject: 
If your interested in ordering a set of Paul Woolsons Neck tennon jig plans please email me at

lance@kragenbrinkguitars.com
With WOOLSON NECK JIG in the subject line.

I'd like to get an idea of how many we need to order.
They will be 18.00 including domestic shipping.

We will also be reording SJ, OM, bowl profiling jig, X brace profiling jig and the Climbing rose inlay plan.

So if your insterested in any of these please let me know.

Thanks
Lance
Author:  Steve Saville [ Sun Jan 08, 2006 5:28 pm ]
Post subject: 
Can I get a little more information like a picture, description, link etc.?
Author:  Rod True [ Sun Jan 08, 2006 6:58 pm ]
Post subject: 
Steve, here is the link to the discusion where pictures of Paul's jig is posted. Paul's jig starts around 25 posts into the topic.
Author:  LanceK [ Mon Jan 09, 2006 12:53 am ]
Post subject: 
UPDATE on the Jig plans -

We have gotten quite a few requests for plans, im going to give it the rest of this week and then place the order. Obviously what im wanting to do is order enough to meet the immediate need and still have some stocked
Also, just a reminder, I will be ordering all other plans as well, currently we are out of the Vine, and SJ planss.

Thanks
Lance
Author:  BlueSpirit [ Mon Jan 09, 2006 7:05 am ]
Post subject: 
Put me on the list for Paul's plan.
Author:  John Kinnaird [ Mon Jan 09, 2006 10:02 am ]
Post subject: 
Put me on that list as well.

John
Author:  Dave Rector [ Mon Jan 09, 2006 10:09 am ]
Post subject: 
Lance, even though we spoke through email, please put me on the list for the Woolson jig plan as well as the OM plans.
Author:  Steve Saville [ Tue Jan 10, 2006 6:00 pm ]
Post subject: 
[QUOTE=LanceK] We will also be reording SJ, OM, bowl profiling jig, X brace profiling jig and the Climbing rose inlay plan.[/QUOTE]Lance,
I'm interested in a SJ plan when available,
Thanks
Author:  crazymanmichael [ Wed Jan 11, 2006 3:09 am ]
Post subject: 
just wanted to confirm that i want a set of the jig plans.
Author:  Dave Anderson [ Wed Jan 11, 2006 4:19 am ]
Post subject: 
Put me down for the Woolson and SJ plans Lance,Tanks
Author:  EBarajas [ Wed Jan 11, 2006 12:20 pm ]
Post subject: 
Lance put me down for a set of the Wolson neck jig plans please.
Author:  PaddyD [ Thu Jan 12, 2006 1:02 am ]
Post subject: 
hi lance,

i'm new to the OLF but i would really like a copy of the neck jig plans too

Author:  Graham Steward [ Thu Jan 12, 2006 10:12 am ]
Post subject: 
SJ Plans for me Lance.

Thanks
Author:  Pwoolson [ Thu Jan 12, 2006 2:08 pm ]
Post subject: 
Ted, when I first made mine, it DID give me a bad day. Now I've got a big notch cut in mine as well.
One think you might look into doing on yours is putting a adjustable rod at the end of your al channel. What you have there is what Charles Fox uses which give you the neck to body joint. But it doesn't account for the projection of the strings. When I was using his design, I had good neck joints but the bridge would need to be some insane 5/8" tall to work right. My design fixes that. Drop me an email at paul @ woolsonsoundcraft . com and I can send you some pics if you want to see what I'm talking about.
Author:  buddy lee [ Sat Jan 14, 2006 1:25 pm ]
Post subject: 
Lance, I'll take a neck jig plans set.
Author:  KevinA [ Tue Jan 17, 2006 5:25 am ]
Post subject: 
Lance, If its not too late, put me down for the neck tenoning jig plans.
Author:  Andy Zimmerman [ Tue Jan 17, 2006 10:13 am ]
Post subject: 
I will take a set as well
Andy
Author:  LanceK [ Tue Jan 17, 2006 2:48 pm ]
Post subject: 
Thanks guys, its not to late and im hoping to have all the plans back in stock late next week, Ill keep ya all posted
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/