Official Luthiers Forum! • View topic - 0 Martin 12 fret guitar

Board index » Forum Archive

All times are UTC - 5 hours

0 Martin 12 fret guitar - bracing pattern

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Andy Zimmerman

Post subject:

Posted: Sat Jan 28, 2006 4:34 pm

Brazilian Rosewood

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build

I am making myself a small parlor like guitar for travel. The body mold I
have is an 0 martin 12 fret. The only plans I have are for a "small concert
parlor " guitar by Scott Antes. The 0 martin is a bit bigger. (Wider and
longer body) My plans call for only one tone bar and one finger brace on
each side of the X braces. Since my guitar is a bit bigger would you change
the bracing pattern?
2 tone bars???
more finger braces???
I have never made any guitar smaller than an OM so I have no clue.
Suggestions....help????
Andy

_________________
Andy Z.
http://www.lazydogguitars.com

Top

Brock Poling

Post subject:

Posted: Sat Jan 28, 2006 4:59 pm

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

I snagged a bracing scheme from the MIMF and took it to a copy shop and had it blown up full to size. I don't know how faithful it is to the original, but it makes a nice guitar.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

JJ Donohue

Post subject:

Posted: Sat Jan 28, 2006 5:06 pm

Brazilian Rosewood

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA

I'd stay with the Antes bracing, but check out Brock's suggestion to get alternative ideas.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com

Top

Dickey

Post subject:

Posted: Sat Jan 28, 2006 5:13 pm

Brazilian Rosewood

Joined: Wed Dec 29, 2004 5:10 am
Posts: 2020
Location: Argentina

Andy, here is a Gibson L-00 bracing, about the size of what you are talking about. Take a look, 2 tone bars, 1 finger brace, 1/4 inch brace stock.

Top

Colin S

Post subject:

Posted: Sat Jan 28, 2006 9:12 pm

Brazilian Rosewood

Joined: Thu Jan 06, 2005 7:29 am
Posts: 3840
Location: England

On the basis that most guitars are way overbraced (my present hobby horse) I'd stick with the single tone bar, or put a single transverse bar ala larivee.

Colin

_________________
I don't believe in anything, I simply make use of a set of reasonable working hypotheses.

Top

RussellR

Post subject:

Posted: Sun Jan 29, 2006 12:34 am

Brazilian Rosewood

Joined: Thu Jun 16, 2005 10:31 am
Posts: 2103
Location: United Kingdom

Hi Andy

On my O Size I use a double Tone Bar and Double Finger Braces. I sort through for tops which are more flexible than I would usuallt use.

My Bracing is like this

Top

tippie53

Post subject:

Posted: Sun Jan 29, 2006 1:18 am

Koa

Joined: Thu Feb 17, 2005 3:38 pm
Posts: 1542
Location: United States

If you want Martin Bracing I have the actuall tracings from the production floor. Antes layout is close. You do have to remember that bracing is scale length oriented.
The 0 has 1 tone bar and 1 finger brace. The X braces also don't go as high up the body towards the neck.
If you need to I am in the shop 570-682-8046 and I can help you out over the phone
john

Top

Andy Zimmerman

Post subject:

Posted: Sun Jan 29, 2006 1:41 am

Brazilian Rosewood

Thanks
Andy

_________________
Andy Z.
http://www.lazydogguitars.com

Top

Page 1 of 1

[ 8 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 23 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: